Deployment Guide

Deployment Guide 7
License Agreements
NOTE: Your Dell configuration includes a 30-day trial license of the Oracle software. If you do not have a license
for this product, contact your Dell sales representative.
Important Documentation
For more information on specific hardware components, see the documentation that came with your system.
For Oracle product information, see the How to Get Started guide in the Oracle CD kit.
Dell|EMC CX200, CX300, CX400,
CX500, or CX700 Fibre Channel storage
system
See the Dell|Oracle Tested and Validated Configurations website
at www.dell.com/10g for information on supported configurations
Gigabit Ethernet switch (two) See the Dell|Oracle Tested and Validated Configurations website
at www.dell.com/10g for information on supported configurations
Dell|EMC Fibre Channel switch (two) Eight ports for two to six nodes
16 ports for seven or eight nodes
Table 1-2. Minimum Hardware Requirements—Fibre Channel Cluster (continued)
Hardware Component Configuration
Table 1-3. Minimum Hardware Requirements—Single Node
Hardware Component Configuration
Dell PowerEdge 1750, 1850, 2600, 2650, 2800,
2850, 4600, 6600, 6650, 6800, and 6850 systems
3-GHz Intel Xeon processor
1 GB of RAM
Two 36-GB hard drives (RAID 1) connected to a PERC
Two NIC ports
Dell|EMC CX200, CX300, CX400, CX500, or
CX700 Fibre Channel storage system (optional)
See the Dell|Oracle Tested and Validated Configurations
website at www.dell.com/10g for information on supported
configurations
Dell|EMC Fibre Channel switch (optional) Eight ports