Deployment Guide

Deployment Guide 59
Getting Help
Dell Support
For detailed information on the use of your system, see the documentation that came with your system
components.
For white papers, Dell supported configurations, and general information, visit the Dell and Oracle
website at www.dell.com/oracle.
For Dell technical support for your hardware and operating system software and to download the latest
updates for your system, visit the Dell Support website at support.dell.com. Information about
contacting Dell is provided in your system’s Installation and Troubleshooting Guide.
Dell Enterprise Training and Certification is now available; see www.dell.com/training for more
information. This training service may not be offered in all locations.
Fibre
Channel
storage
You receive I/O
errors and warnings
when you load the
Fibre Channel HBA
driver module.
The HBA driver, BIOS, or
firmware needs to be
updated.
Check the Solution Deliverable List for the
supported versions on the Dell|Oracle Tested and
Validated Configurations website at
www.dell.com/10g. Update as required the driver,
BIOS, and firmware for the Fibre Channel HBAs.
8-node
OCFS2 setup
with DBCA
You receive the
error message
ORA-04031
unable to
allocate
4180 bytes of
shared memory.
The default memory
allocation for an 8-node
cluster is too small.
In the Initialization Parameters Window, change
the value of the Shared Pool to 500 MB from the
default value of 95 MB and click Next.
OCFS2 On reboot, an error
message appears:
mount.ocfs2:
Transport
endpoint is
not connected
while
mounting
/dev/emcpower
a1 on /u01/
The private interconnect is
not up at the mount time.
Ignore the error message. The mount problem is
handled in the deployment procedure.
Table 1-8. Troubleshooting (continued)
Category Problem / Symptom Cause Recommended Corrective Action