Owner's Manual

32 Deployment Guide
f In the Generate stamps with this prefix field, keep the default settings and click Next .
g In the Stamp disks window, click Next .
h Click Finish to save your settings.
i Select the check boxes next to the available disks and click OK.
16
In the ASM Disk Groups window, click Create New .
17 In the Create Disk Group window, enter the information for the recovery files.
a In the Disk Group Name field, enter a name for the new disk group.
For example,
FLASH .
b In the Redundancy box, select External .
c Click Stamp Disks .
d Select Add or change label and click Next .
e In the Select disks screen, press <Ctrl> and select the remaining disks with Candidate
device
assigned in the Status column.
f In the Generate stamps with this prefix field, type FLASH , and click Next .
g In the Stamp disks window, click Next .
h Click Finish to save your settings.
i Select the check boxes next to the available disks and click OK.
The ASM Disk Group Window appears, indicating that the software is creating the disk group.
When completed, the
FLASH disk group appears in the Disk Group Name column.
18 Select only the Disk Group Name that you assigned to DATABASE in step 15 and click Next .
19 In the Database File Locations window, select Use Oracle-Managed Files and click Next .
20 In the Recovery Configuration window, perform the following steps:
a Select Specify Flash Recovery Area .
b Click Browse .
c Select the FLASH disk group that you created in step 17 and click OK .
d Select Enable Archiving .
e Click Next .
21 In the Database Content window, click Next .
22 In the Database Services window, click Next .
23 In the Initialization Parameters window, click Next .
24 In the Database Storage window, click Next .
25 In the Creation Options window, click Finish .