Owner's Manual

Deployment Guide 27
12 In the Specify Cluster Configuration window, add the nodes that will be managed by Oracle Clusterware.
a Click Add .
b Enter a name for the Public Node Name , Private Node Name , and Virtual Host Name , and then
click
OK .
c Repeat step a and step b for the remaining nodes.
d In the Cluster Name field, type a name for your cluster.
The default cluster name is
crs .
e Click Next .
13 In the Specify Network Interface Usage window, ensure that the public and private interface names
are correct.
To modify an interface, perform the following steps:
a Select the interface name and click Edit .
b In the Edit private interconnect type window in the Interface Type box, select the appropriate
interface type and then click
OK .
c In the Specify Network Interface Usage window, ensure that the public and private interface
names are correct, and then click
Next .
14 In the Specify Oracle Cluster Registry (OCR) Location window, perform the following steps:
a In the OCR Configuration box, select External Redundancy .
b In the Specify OCR Location field, type:
/dev/raw/ocr.dbf
Or
/u01/ocr.dbf if using OCFS2.
c Click Next .
15 In the Specify Voting Disk Location window, perform the following steps:
a In the OCR Configuration box, select External Redundancy .
b In the Specify OCR Location field, type:
/dev/raw/votingdisk
Or
/u01/votingdisk if using OCFS2.
c Click Next .