Owner's Manual

26 Deployment Guide
Installing Oracle Clusterware
1 Log in as root .
2 Start the X Window System by typing:
startx
3 Open a terminal window and type:
xhost +
4
Mount the Oracle Clusterware CD.
5 Ty p e :
<CD_mountpoint>/cluvfy/runcluvfy.sh stage -pre crsinst
-n node1,node2 -r 10gR2 -verbose
where node1 and node2 are the public host names.
If your system is
not configured correctly, troubleshoot the issues and then repeat the runcluvfy.sh
command, above.
If your system is configured correctly, the following message appears:
Pre-check for cluster services setup was successful on all the nodes.
6 Ty p e :
su - oracle
7
Type the following commands to start the Oracle Universal Installer:
unset ORACLE_HOME
<CD_mountpoint> /runInstaller
The following message appears:
Was ’rootpre.sh’ been run by root? [y/n] (n)
8
Ty p e y to proceed.
9 In the Welcome window, click Next .
10 In the Specify Home Details window, change the Oracle home path to /crs/oracle/product/10.2.0/crs
and click
Next .
11 In the Product-Specific Prerequisite Checks window, ensure that Succeeded appears in the Status
column for each system check, and then click
Next .