Owner's Manual

Deployment Guide 43
5 Insert the Dell OpenManage Systems Management CD into the CD drive on the system.
6 Ty p e mount /mnt/cdrom to mount the CD.
7 Click start.sh located in the root directory of the CD to start the setup program.
8 Click Next on the Welcome to Dell OpenManage Systems Management Installation screen.
9 Read and accept the software license agreement to continue.
The setup program provides both an
Express Setup option and a Custom Setup option. The
Express Setup option (recommended) automatically installs all of the software components
necessary to manage your system. The
Custom Setup option allows you to select which
software components you want to install.
The rest of this procedure is based on the
Express Setup option. See the Server Administrator
User's Guide
for information about the Custom Setup option.
10 Click Express Setup .
11 Read the information on the Installation Summary screen, and then click Next .
The setup program automatically installs all of the managed system software for your
hardware configuration.
12 When the installation is complete, click Finish .
See the
Server Administrator User's Guide for instructions about uninstalling the managed system
software.
To configure the automatic reboot option, perform the following steps:
1 Ty p e :
omconfig system recovery action=reboot
This command sets the automatic reboot timer to a default setting of 480 seconds—the time
delay before the timer automatically reboots an unresponsive system.
2 To change the timer setting to a different value, type:
omconfig system recovery timer=<seconds>
3
To verify the system reboot timer settings, type:
omreport system recovery