Owner's Manual

20 Deployment Guide
7 Type the following commands to start the Oracle Universal Installer:
unset ORACLE_HOME
<CD_mountpoint> /runInstaller
The following message appears:
Was ’rootpre.sh’ been run by root? [y/n] (n)
8
Ty p e y to proceed.
9 In the Welcome window, click Next .
10 In the Specify Home Details window, change the Oracle home path to /crs/oracle/product/10.2.0/crs
and click
Next .
11 In the Product-Specific Prerequisite Checks window, ensure that Succeeded appears in the Status
column for each system check, and then click
Next .
12 In the Specify Cluster Configuration window, add the cluster nodes that will be managed by the
Oracle Clusterware.
a Click Add .
b Enter a name for the Public Node Name , Private Node Name , and Virtual Host Name , and then
click
OK .
c Repeat step a and step b for the remaining cluster nodes.
d In the Cluster Name field, type a name for your cluster.
The default cluster name is
crs .
e Click Next .
13 In the Specify Network Interface Usage window, ensure that the public and private interface names
are correct.
To modify an interface, perform the following steps:
a Select the interface name and click Edit .
b In the Edit private interconnect type window in the Interface Type box, select the appropriate
interface type and then click
OK .
c In the Specify Network Interface Usage window, ensure that the public and private interface
names are correct, and then click
Next .
14 In the Specify Oracle Cluster Registry (OCR) Location window, perform the following steps:
a In the OCR Configuration box, select External Redundancy .
b In the Specify OCR Location field, type:
/dev/raw/ocr.dbf
c Click Next .