Users Guide

Installing Upgrades 73

Small Mini-Tower Computer

If you are installing a new expansion card, remove the filler bracket for

an empty card-slot opening, and then continue with step 8.

NOTE: The AGP

expansion slot only

supports 1.5-V cards.

If you are replacing an expansion card that is already installed in the

computer, remove the expansion card.

If necessary, disconnect any cables connected to the card. Grasp the

card by its top corners, and ease it out of its connector.

8 Prepare the expansion card for installation.

1 expansion card

2 card-edge connector

3 expansion-card connector

4 retention arm

5 lever