Dell™ OptiPlex™ SFF AIO Stand User’s Guide Model: IKAIO-01 1 /13
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ____________________ Information in this publication is subject to change without notice. © 2011 Dell Inc. All rights reserved.
Contents 1 About your Dell OptiPlex SFF All-in-One Stand...................................................... 4 2 Setting up your Dell OptiPlex SFF All-in-One Stand ............................................... 6 3 Specifications ...................................................................................................... 13 4 Finding Information ............................................................................................
About your Dell OptiPlex SFF All-in-One Stand 7 1 9 8 2 3 4 13 5 12 6 11 10 1 DELL Monitor: 17” - 24” 7 Handle 2 DELL Quick Release Monitor Mounting Plate 8 Computer Lock Switch 3 Computer: Dell OptiPlex SFF 9 Computer Cable Cover 4 Cable Management Slot 10 Padlock Ring 5 Swiveling Base - 360 ° Pan 11 Power Connector 6 Cable Tray 12 Network Connector 13 Security Cable Slot Range of Motion +17° - 5° 90 mm 360° 4 /13
Venting Clearance Requirements CAUTION: Do not stack the equipment, place it in an enclosed space, or otherwise install it where it is subject to heated air. The equipment should have at least 10.2 cm (4 inches) of clearance on all vented sides to permit the airflow required for proper ventilation. Restricting airflow can damage the equipment or cause overheating.
Setting up the Dell OptiPlex SFF AIO Stand Box Contents AIO Stand, Cable Cover, VGA Cable, USB Cable NOTE: Refer to the Monitor and Computer Instruction Guides, packaged separately. 1 Place the AIO Stand on a level, stable surface. WARNING: To reduce risk of injury and/or equipment damage, the AIO Stand must be placed on a level, stable surface.
2 Turn the dial to set the AIO stand weight capacity to match your monitor weight. 5.5 - 9.3 lb (2.5 - 4.25 kg) lb. kg 9.4 -13.2 lb (4.26 - 6.0 kg) 3 Attach the monitor to the AIO stand.
4 a Connect the power cable, the monitor cable, and the USB cable to the monitor. b Route the monitor and USB cables through the front cable management slot. 5 Leaving sufficient slack, tuck the monitor cable into the cable channel. NOTE: Store any excess cable in the cable tray.
6 7 Route the accessory cables (keyboard, mouse, speakers, etc.) through the front cable management slot. Slide the computer down and forward onto the AIO stand.
8 9 Connect the monitor cable, power cable, network cable and any accessory cables, (keyboard, mouse, speaker, etc.) to the rear of the computer. Attach the cable cover to the computer. NOTE: The hooks on the cover slide into the slots on the chassis.
10 Slide the switch to lock the computer to the AIO stand. 11 a Connect the network cable to the rear of the AIO stand and facility network. b Connect the power cable supplied with the computer to the rear of the AIO Stand and to facility wall socket.
Attach security accessories.
Specifications Physical Dimensions* Height Depth Width Weight 15.4” (390 mm) 11.7” (298 mm) 16.5” (418 mm) 12.8 lb. (5.8 kg) * Not including monitor and computer Monitor and Computer Weight Capacities Dell Monitors, 17” to 24” with Quick Release Mechanism Dell Computer: OptiPlex SFF 5.5 to 13.2 lb. (2.5 to 6.0 kg) ≤ 13.75 lb. (6.24 kg) Temperature Operating Storage Transportation Power Ratings Input 100-240 V~, 50/60 Hz, 7.0 - A Output - Monitor Port 100-240 V~, 50/60 Hz, 2.
