Owner`s manual

Power Management

• Power Off

• Power On

• Last State

This option is Power Off by default.

Auto On Time Sets time to automatically turn on the computer. Time is kept in

standard 12-hour format (hour:minutes:seconds). Change the

startup time by typing the values in the time and AM/PM fields.

NOTE: This feature does not work if you turn off your

computer using the switch on a power strip or surge

protector or if Auto Power is set to disabled.

Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.

• Disabled

• Enabled in S5 only

• Enabled in S4 and S5

This option is Disabled by default.

Fan Control Override Controls the speed of the system fan. This option is disabled by

default.

NOTE: When enabled, the fan runs at full speed.

Wake on LAN This option allows the computer to power up from the off state

when triggered by a special LAN signal. This feature only works

when the computer is connected to AC power supply.

• Disabled - Does not allow the system to power on by special

LAN signals when it receives a wake-up signal from the

LAN or wireless LAN.

• LAN Only - Allows the system to be powered on by special

LAN signals.

This option is Disabled by default.

POST Behavior

Numlock LED Allows you to enable or disable the Numlock feature when your

computer starts. This option is enabled by default.