Users Guide

I/O Panel: Dell OptiPlex 320 User's Guide
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/mt_iopan.htm[5/22/2015 10:43:31 AM]
Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 320 User's Guide
Removing the I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the
new I/O panel.
1. Follow the procedures in Before You Begin
.
NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result in damage to
the cable connectors and the cable routing clips.
2. Remove the screw that secures the I/O panel.
3. Press the release tab on the I/O panel connector and pull the connector away from the card.
4. Disconnect all of the cables from the I/O panel, and remove the panel from the computer.
1 I/O panel release button
2 securing screw