Users Guide

Troubleshooting Tools and Utilities: Dell OptiPlex 320 User's Guide

file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/trouble.htm[5/22/2015 10:43:21 AM]

Controller has failed — See Drive Problems.

Data error — See Drive Problems.

Decreasing available memory —

See Lockups and Software Problems

Diskette drive 0 seek failure — See Drive Problems.

Diskette read failure —

See Drive Problems

Diskette subsystem reset failed — Run the Dell Diagnostics. See Dell Diagnostics.

Diskette write protected — Slide the write-protect notch on the floppy disk to the open position.

Drive not ready — Put a floppy disk in the drive.

Gate A20 failure —

See Lockups and Software Problems

Hard-disk configuration error —

Hard-disk controller failure —

Hard-disk drive failure —

See Drive Problems

Insert bootable media — Insert a bootable floppy disk or CD.

Invalid configuration information - please run SETUP program — Enter system setup and correct the

computer configuration information (see System Setup

Keyboard failure — See Keyboard Problems.

Memory address line failure at address, read value expecting value — See Lockups and Software

Problems.

Memory allocation error —

1. Turn off the computer, wait 30 seconds, and then restart the computer.

2. Try to run the program again.

3. If the error message appears again, see the software documentation for additional troubleshooting

suggestions.

Memory data line failure at address, read value expecting value —