Users Guide

Drives: Dell OptiPlex 320 User's Guide
file:///N|/For_lekha/For%20Deepa/Nadia/UG/A00/en/nadia-temp-working-jul19/Nadia_UG_A00/Output/mt_drive.htm[5/22/2015 10:43:38 AM]
2 drive release latch
5. If you are replacing the CD/DVD drive, see Installing a CD/DVD Drive
.
Otherwise, replace the drive panel by aligning its hinges and rotating it up until it snaps into place.
6. Replace the computer cover (see Replacing the Computer Cover).
Installing a CD/DVD Drive
1. Follow the procedures in Before You Begin.
2. If you are replacing a CD/DVD drive, remove the shoulder screws from the existing drive and attach the screws to the
replacement drive.
3. If you are installing a new CD/DVD drive:
a. Remove the drive-panel insert for your new drive (see Drive-Panel Inserts
).
b. Remove the shoulder screws from the inside of the drive-panel insert.
c. Attach the screws to the new drive.
4. Check the documentation that accompanied the drive to verify that the drive is configured for your computer.
If you are installing an IDE drive, configure the drive for the cable select setting by using the documentation that came
with the drive.
5. Align the shoulder screws on the CD/DVD drive with the shoulder screw slots, and slide the drive into the bay until it
clicks into place.