Users Guide

Table 7. /get commands for Dell Optimizer (continued)
/get command Details
/get -name=ProximitySensor.WalkAwayLockTimer
Use this command to display details about the proximity
sensor walk away lock timer state.
Table 8. Configure commands for Dell Optimizer
/configure command Details Supported Values
/configure -
name=<settingname> -lock=
Use this command to lock the specific
setting from being changed by user.
True and false
/configure -
name=Telemetry.State -value=
Use this command to configure Dell
Optimizer Customer Experience
Improvement Program.
True and false
/configure -
name=AppPerformance.State -
value=
Use this command to configure the
application performance state value.
True and false
/configure -name=Audio.State
-value=
Use this command to configure the audio
state value.
True and false
/configure -
name=Audio.Audio3D -value=
Use this command to configure the audio
3D value.
True and false
/configure -
name=Audio.IsNXOSEnabled -
value=
Use this command to configure the audio
sNXOS value.
True and false
/configure -
name=Audio.JackNotification -
value=
Use this command to configure the audio
jack notification value.
True and false
/configure -
name=Audio.Environment -
value=
Use this command to configure the audio
environment value.
QuietRoom, NoisyOffice, MultipleVoices,
and RecordingStudio
/configure -
name=BatteryExtender.State -
value=
Use this command to configure the
battery extender state value.
True and false
/configure -
name=DynamicCharge.State -
value=
Use this command to configure the
dynamic charge state value.
True and false
/configure -
name=ProximitySensor.State -
value=
Use this command to configure the
proximity sensor state value.
True and false
/configure -
name=ProximitySensor.EnableWi
thExternalMonitor -value=
Use this command to configure the
proximity sensor that is enabled with
external monitor state value.
True and false
/configure -
name=ProximitySensor.KeepAliv
e -value=
Use this command to configure the
proximity sensor keep alive state value.
True and false
/configure -
name=ProximitySensor.SnoozeTi
mer -value=
Use this command to configure the
proximity sensor snooze timer value.
30, 60, 90, and 120 minutes
/configure -
name=ProximitySensor.WakeOnAp
proach -value=
Use this command to configure the
proximity sensor wake on approach
value.
True and false
/configure -
name=ProximitySensor.WalkAway
Lock -value=
Use this command to configure the
proximity sensor walk away lock value.
True and false
16 Administration