Users Guide

Table 8. Configure commands for Dell Optimizer
/configure command Details Supported Values
/configure -name=Audio.Audio3D -
value=
Use this command to configure the
audio 3D value.
True and false
/configure -name=Audio.AutoMute -
value
Use this command to configure the
audio automute value.
True and false
/configure -name=Audio.Environment -
value=
Use this command to configure the
audio environment value.
QuietRoom, NoisyOffice,
MultipleVoices, and
RecordingStudio
/configure -
name=Audio.JackNotification -value=
Use this command to configure the
state of the audio jack notification.
True and false
/configure -name=Audio.State -value=
Use this command to configure the
audio state value.
True and false
/configure -
name=BatteryExtender.State -value=
Use this command to configure the
battery extender state value.
True and false
/configure -
name=DellOptimizerConfiguration.Beta
Features -value=
Use this command to configure the
Beta feature value.
True and false
/configure -
name=DellOptimizerConfiguration.Stic
kyBanners -value=
Use this command to configure the
sticky banners value.
True and false
/configure -
name=DellOptimizerConfiguration.Sugg
estions -value=
Use this command to configure the
suggestions component value.
True and false
/configure -name=DynamicCharge.State
-value=
Use this command to configure the
dynamic charge state value.
True and false
/configure -
name=Privacy.EnablePrivacyNotificati
ons -value=
Use this command to configure the
privacy notifications value.
True and false
/configure -
name=ProximitySensor.CameraBasedDete
ction - value
Use this command to configure
proximity sensor camera based
detection state on products supporting
Intel® Visual Sensing Technology.
True and false
/configure -
name=ProximitySensor.EnableWithExter
nalMonitor -value=
Use this command to configure the
state of proximity sensor features
when system is connected to an
external monitor.
True and false
/configure -
name=ProximitySensor.KeepAlive -
value=
Use this command to configure the
proximity sensor keep alive state value.
True and false
/configure -
name=ProximitySensor.SnoozeTimer -
value=
Use this command to configure the
proximity sensor snooze timer value for
the walk away lock feature.
0,30, 60, 90, and 120
minutes
/configure -
name=ProximitySensor.WalkAwayLock -
value=
Use this command to configure the
proximity sensor walk away lock value.
True and false
/configure -
name=ProximitySensor.WalkAwayLockTim
er -value=
Use this command to configure the
proximity sensor walk away lock timer
value.
30, 60, and 120 seconds
/configure -
name=ProximitySensor.WakeOnApproach
-value=
Use this command to configure the
proximity sensor wake on approach
value.
True and false
28 Administration