Users Guide

Table 6. CLI Commands for Dell Optimizer
CLI Command Description
/help
Use this command to display the list of available arguments.
/version
Use this command to display the current version of Dell
Optimizer.
/get
Use this command to display all available settings and their
properties. You can combine the command with additional
options for specific setting details.
/configure
Use this command to configure a setting, and the command
must be combined with additional options for a specific
setting. These settings are dynamic, and it is not a static list.
/appperformance
Use this command to display the Applications feature settings
and configuration information. The command must be used
with additional options. These settings are dynamic, and it is
not a static list.
Table 7. /get commands for Dell Optimizer
/get command Details
/get
Use this command to display all settings details.
/get -name=Telemetry.State
Use this command to display current participation status
in the Dell Optimizer Customer Experience Improvement
Program.
/get -list categories
Use this command to display the name of all available feature
categories. For example, Application, Audio, Power.
/get -category=<categoryname>
Use this command to display all settings and current values of
the selected category.
/get -name=Audio.State
Use this command to display details about the audio state.
/get -name=Audio.Audio3D
Use this command to display details about the audio 3D state.
/get -name=Audio.Environment
Use this command to display details about the audio
environment state.
/get -name=Audio.IsNXOSEnabled
Use this command to display details about the audio IsNXOS
state.
/get -name=Audio.JackNotification
Use this command to display details about the audio jack
state.
/get -name=BatteryExtender.State
Use this command to display details about the battery
extender state.
/get -name=DynamicCharge.State
Use this command to display details about the dynamic charge
state.
/get -name=ProximitySensor.State
Use this command to display details about the proximity
sensor state.
/get -name=
ProximitySensor.EnableWithExternalMonitor
Use this command to display details about the proximity
sensor that is enabled with external monitor state.
/get -name="ProximitySensor.KeepAlive"
Use this command to display details about the proximity
sensor keep alive state.
/get -name= ProximitySensor.WakeOnApproach
Use this command to display details about the proximity
sensor wake on approach state.
/get -name=ProximitySensor.WalkAwayLock
Use this command to display details about the proximity
sensor walk away lock state.
Administration 15