Reference Guide

Cause
An Informational event was detected on the Non-Volatile Dual In-line Memory Module (NVDIMM) device .
Event ID — 1439
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Warning
Cause
A Non-Critical event was detected on the Dual In-line Memory Module (DIMM) device .
Event ID — 1440
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause
An Informational-only event was detected on Dual In-line Memory Module (DIMM) device.
Event ID — 1441
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Warning
Cause
A Non-Critical event was detected on the Dual In-line Memory Module (DIMM) device.
Hardware Log Sensor Messages
The hardware logs provide hardware status messages to systems management software. On certain systems, the hardware log
is implemented as a circular queue. When the log becomes full, the oldest status messages are overwritten when new status
messages are logged. On some systems, the log is not circular. On these systems, when the log becomes full, subsequent
hardware status messages are lost. Hardware log sensor messages listed provides status and warning information about the
noncircular logs that may fill up, resulting in lost status messages.
Event ID — 1550
Description
Log monitoring has been disabled
Log type: <Log type>
Severity Warning
Server Management Messages 45