Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software Version 9.5
31323334353637383940
Severity Error
Cause A redundancy sensor in the specified system failed. The redundancy unit location, chassis location,
previous redundancy state, and the number of devices required for full redundancy are provided.
Event ID — 1301
Description
Redundancy sensor value unknown Redundancy unit: <Redundancy Location in
chassis>
Chassis location: <Name of chassis>
Previous redundancy state was: <State>
Severity Warning
Cause A redundancy sensor in the specified system could not obtain a reading. The redundancy unit location,
chassis location, previous redundancy state, and the number of devices required for full redundancy are
provided.
Event ID — 1302
Description
Redundancy not applicable Redundancy unit: <Redundancy Location in chassis>
Chassis location: <Name of chassis>
Previous redundancy state was: <State>
Severity Information
Cause A redundancy sensor in the specified system detected that a unit was not redundant. The redundancy
location, chassis location, previous redundancy state, and the number of devices required for full
redundancy information is provided.
Event ID — 1303
Description
Redundancy is offline Redundancy unit: <Redundancy Location in chassis>
Chassis location: <Name of chassis>
Previous redundancy state was: <State>
Severity Information
Cause A redundancy sensor in the specified system detected that a redundant unit is offline. The redundancy
unit location, chassis location, previous redundancy state, and the number of devices required for full
redundancy information is provided.
Event ID — 1304
Description
Redundancy regained Redundancy unit: <Redundancy Location in chassis>
Chassis location: <Name of chassis>
Previous redundancy state was: <State>
Severity Information
Cause A redundancy sensor in the specified system detected that a “lost” redundancy device has been
reconnected or replaced; full redundancy is in effect. The redundancy unit location, chassis location,
previous redundancy state, and the number of devices required for full redundancy information is
provided.
38 Server Management Messages