Reference Guide

Table 14. Drive Events (continued)
Event Message Severity Cause
Drive <Drive #> consistency
check in progress was
asserted.
Warning This event is generated when the drive is
placed in consistency check.
Drive <Drive #> consistency
check in progress was
deasserted.
Information This event is generated when the
consistency check of the drive is
completed.
Drive <Drive #> in critical
array was asserted.
Critical This event is generated when the drive is
placed in critical array.
Drive <Drive #> in critical
array was deasserted.
Information This event is generated when the drive is
removed from critical array.
Drive <Drive #> in failed
array was asserted.
Critical This event is generated when the drive is
placed in the fail array.
Drive <Drive #> in failed
array was deasserted.
Information This event is generated when the drive is
removed from the fail array.
Drive <Drive #> rebuild in
progress was asserted.
Information This event is generated when the drive is
rebuilding.
Drive <Drive #> rebuild
aborted was asserted.
Warning This event is generated when the drive
rebuilding process is aborted.
Drive <Drive #> is installed.
Information This event is generated when the drive is
installed.
Drive <Drive #> is removed.
Critical This event is generated when the drive is
removed.
Fault detected on drive
<Drive #>.
Critical This event is generated when the
specified drive in the array is faulty.
Intrusion Events
The chassis intrusion messages are a security measure. Chassis intrusion alerts are generated when the system's chassis is
opened. Alerts are sent to prevent unauthorized removal of parts from the chassis.
Table 15. Intrusion Events
Event Message Severity Cause
<Intrusion sensor Name>
sensor detected an intrusion.
Critical This event is generated when the
intrusion sensor detects an intrusion.
<Intrusion sensor Name>
sensor returned to normal
state.
Information This event is generated when the earlier
intrusion has been corrected.
<Intrusion sensor Name>
sensor intrusion was asserted
while system was ON.
Critical This event is generated when the
intrusion sensor detects an intrusion
while the system is on.
<Intrusion sensor Name>
sensor intrusion was asserted
while system was OFF.
Critical This event is generated when the
intrusion sensor detects an intrusion
while the system is off.
The chassis is open.
Critical This event is generated when the
intrusion sensor detects an intrusion.
The chassis is closed.
Information This event is generated when the earlier
intrusion has been corrected.
196 System Event Log Messages for IPMI Systems