Reference Guide

Event ID — 2329
Description SAS port report: %1
Severity Warning / Non-critical
Cause and Action Cause: The text for this alert is generated by the controller and can vary depending on the situation. The %1
indicates a substitution variable. The text for this substitution variable is generated by the controller and is
displayed with the alert in the alert log. This text can vary depending on the situation.
Action: Run the PHY integrity test diagnostic. Make sure the cables are attached securely. If the problem
persists, replace the cable with a valid cable according to SAS specifications. If the problem still persists, you may
need to replace some devices such as the controller or EMM. See the hardware documentation for more
information.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2060
SNMP Trap
Numbers
753
Event ID — 2330
Description SAS port report: %1
Severity OK / Normal / Informational
Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the
controller and is displayed with the alert in the alert log. This text can vary depending on the situation. This alert is
for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
751
Event ID — 2331
Description
A bad disk block has been reassigned.
Severity OK / Normal / Informational
Cause and Action Cause: The disk has a bad block. Data has been readdressed to another disk block and no data loss has occurred.
Action: Monitor the disk for other alerts or indications of poor health. For example, you may receive alert 2306.
Replace the disk if you suspect there is a problem.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: None
SNMP Trap
Numbers
901
Storage Management Message Reference 131