Reference Guide

Severity Warning / Non-critical
Cause and Action Cause: The firmware on the EMM modules is not the same version. It is required that both modules have the
same version of the firmware. This alert may be caused if you attempt to insert an EMM module that has a
different firmware version than an existing module. The %1 and %2 indicate a substitution variable. The text for
these substitution variables is displayed with the alert in the alert log and can vary depending on the situation.
Action: Upgrade to the same version of the firmware on both EMM modules.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2090
SNMP Trap
Numbers
853
Event ID — 2312
Description A power supply in the enclosure has an AC failure.
Severity Warning / Non-critical
Cause and Action Cause: The power supply has an AC failure.
Action: Replace the power supply.
Related Alert
Information
Clear Alert Number: 1003
Related Alert Number: 2122, 2324
Local Response Agent (LRA) Number: 2090
SNMP Trap
Numbers
1003
Event Id — 2313
Description
A power supply in the enclosure has a DC failure.
Severity Warning / Non-critical
Cause and Action Cause: The power supply has a DC failure.
Action: Replace the power supply.
Related Alert
Information
Clear Alert Number: 2323
Related Alert Number: 2122, 2333
Local Response Agent (LRA) Number: 2090
SNMP Trap
Numbers
1003
Event ID — 2314
Description
The initialization sequence of SAS components failed during system startup. SAS management and monitoring is
not possible.
Severity Critical / Failure / Error
Cause and Action Cause: Storage Management is unable to monitor or manage SAS devices.
Action: Reboot the system. If problem persists, make sure you have supported versions of the drivers and
firmware. Also, you may need to reinstall Storage Management or Server Administrator because of some missing
installation components.
126 Storage Management Message Reference