Reference Guide

Action: Power down all enclosures attached to the system and reboot the system. If the problem persists,
upgrade the firmware to the latest supported version. You can download the most current version of the driver
and firmware from the support site. Make sure the cable configuration is valid. See the hardware documentation
for valid cabling configurations.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2091
SNMP Trap
Numbers
854
Event ID — 2301
Description The enclosure has a hardware error.
Severity Critical / Failure / Error
Cause and Action Cause: The enclosure or an enclosure component is in a Failed or Degraded state.
Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state.
See the hardware documentation for more information.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2091
SNMP Trap
Numbers
854
Event ID — 2302
Description
The enclosure is not responding.
Severity Critical / Failure / Error
Cause and Action Cause: The enclosure or an enclosure component is in a Failed or Degraded state.
Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state.
See the hardware documentation for more information.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2091
SNMP Trap
Numbers
854
Event ID — 2303
Description
The enclosure cannot support both SAS and SATA physical disks. Physical disks may be disabled.
Severity OK / Normal / Informational
Cause and Action Cause: This alert is for informational purposes.
Action: None
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Storage Management Message Reference 123