Reference Guide

Event ID — 1403
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Warning
Cause A memory device correction rate exceeded an acceptable value. The memory device status and possible memory
module event cause information is provided.
Event ID — 1404
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Error
Cause A memory device correction rate exceeded an acceptable value, a memory spare bank was activated, or a multi-bit
ECC error occurred. The system continues to function normally (except for a multi-bit error). Replace the memory
module identied in the message during the system’s next scheduled maintenance. Clear the memory error on
multi-bit ECC error. The memory device status and possible memory module event cause information is provided.
Event ID — 1405
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is nonrecoverable. The memory module failed because of an irrecoverable error.
Event ID — 1425
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, has regained
persistency and is available for use.
Severity Informational
Cause No response action required.
Server Management Messages 47