Reference Guide
If sensor type is discrete:
Discrete temperature state: <State>
Severity Error
Cause A temperature sensor on the backplane board, system board, or drive carrier in the specied system exceeded its
failure threshold. The sensor location, chassis location, previous state, and temperature sensor value are provided.
Event ID — 1055
Description
Temperature sensor detected a non-recoverable value Sensor location: <Location
in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
If sensor type is not discrete:
Temperature sensor value (in degrees Celsius): <Reading>
If sensor type is discrete:
Discrete temperature state: <State>
Severity Error
Cause A temperature sensor on the backplane board, system board, or drive carrier in the specied system detected an
error from which it cannot recover. The sensor location, chassis location, previous state, and temperature sensor
value information is provided.
Cooling Device Messages
The cooling device sensors listed monitor how well a fan is functioning. Cooling device messages provide status and warning information
for fans in a particular chassis.
Event ID — 1100
Description
Fan sensor has failed Sensor location: <Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
Fan sensor value: <Reading>
Severity Error
Cause A fan sensor in the specied system is not functioning. The sensor location, chassis location, previous state, and
fan sensor value information is provided.
32 Server Management Messages