Reference Guide

Description Severity Cause
LinkT/FlexAddr: Link Tuning
sensor, failed to get link
tuning or flex address data
from BMC/iDRAC was asserted
Critical This event is generated when link tuning or
Flex address information is not obtained
from BMC/iDRAC.
The <name> is removed.
Critical This event is generated when the device
was removed.
The <name> is inserted.
Information This event is generated when the device
was inserted or installed.
A fabric mismatch detected
between IOM and mezzanine card
<number>.
Critical This event is generated when an incorrect
Mezzanine card is installed for I/O fabric.
Hardware incompatibility
detected with mezzanine card
<number>.
Critical This event is generated when an incorrect
Mezzanine card is installed in the system.
The QuickPath Interconnect
(QPI) width degraded.
Warning This event is generated when the bus is not
operating at maximum speed or width.
The QuickPath Interconnect
(QPI) width regained.
Information This event is generated when the bus is
operating at maximum speed or width.
BIOS detected an error
configuring the Intel Trusted
Execution Technology (TXT).
Critical This event is generated when TXT
initialization failed.
Processor detected an error
while performing an Intel
Trusted Execution Technology
(TXT) operation.
Critical This event is generated when TXT CPU
microcode boot failed.
BIOS Authenticated Code Module
detected an Intel Trusted
Execution Technology (TXT)
error during POST.
Critical This event is generated when TXT Post
failed.
SINIT Authenticated Code
Module detected an Intel
Trusted Execution Technology
(TXT) error at boot.
Critical This event is generated when the
Authenticated Code Module detected a TXT
initialization failure.
Intel Trusted Execution
Technology (TXT) is operating
correctly.
Information This event is generated when the TXT
returned from a previous failure.
Failure detected on Removable
Flash Media <name>.
Critical This event is generated when the SD card
module is installed but improperly congured
or failed to initialize.
Removable Flash Media <name>
is write protected.
Warning This event is generated when the module is
write-protected. Changes may not be
written to the media.
Internal Dual SD Module is
redundant.
Information This event is generated when both SD cards
are functioning properly.
System Event Log Messages for IPMI Systems 243