Dell EMC OpenManage Software Compatibility Matrix Version 9.3.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview..................................................................................................................................... 4 Acronyms Used In This Document...................................................................................................................................... 4 Supported Operating Systems............................................................................................................................................
1 Overview This document provides information about the interoperability of the OpenManage software products. NOTE: • Upgrade the OpenManage components to the latest version to effectively use the latest features. • For information about compatibility of OpenManage Connections products, see the Dell EMC OpenManage Connections Compatibility Matrix at dell.com/OMConnectionsEnterpriseSystemsManagement. For more information, see the Dell EMC Systems Software Support Matrix at www.dell.com/openmanagemanuals.
Acronym Product Name Server Administrator/OMSA Dell EMC OpenManage Server Administrator SUU Dell EMC Server Update Utility Supported Operating Systems OpenManage Supported operating systems • • • • Red Hat Enterprise Linux 8.0 ESXi 6.5 U3 ESXi 6.7 U2 ESXi 6.7 U3 For more information about the supported operating systems, Network Interface Cards (NIC), and PowerEdge RAID Controllers (PERC), see the Dell EMC Systems Management Software Support Matrix at www.dell.
• 1. 1 to 3 indicates one CPU system 2. 4 to 7 indicates two CPU systems 3. 8 indicates two or four CPU systems 4. 9 indicates four CPU systems The second number indicates the generation. • 1. 0 indicates yx0x generation 2. 1 indicates yx1x generation, and so on The third number indicates the make of the CPU, 0 for Intel and 5 for AMD. So, for example, the R710 model is a Rack 2 CPU system from the yx1x generation of servers with Intel Processors.
2 OpenManage Software Compatibility Matrix This section describes the compatibility among the OpenManage products. NOTE: Dell EMC recommends using the Embedded Management, Integrated Dell Remote Access Controller 9 (iDRAC9) with Lifecycle Controller instead of Dell Systems Build and Update Utility (SBUU). SBUU is replaced with Lifecycle Controller on yx4x generation of PowerEdge servers.
Product Name DUP SUU DSU (Applicable on RedHat) DRM iDRAC9 with LC All versions All versions All versions NA NOTE: • Dell EMC recommends using the latest BIOS available at www.dell.com/Support/Home. • Dell EMC recommends using Dell System Update instead of YUM Linux repository. Compatibility Of Deployment Suite Of Products The following table describes the compatibility of Deployment Suite of Products. Table 5.
Compatibility of Dell Monitoring Products The following table describes the compatibility of Dell EMC monitoring products. Table 7. Monitoring products Product Name Server Administrator iDRAC9 with LC Version 9.3.2 3.40.40.40 Server Administrator 9.3.2 9.3.2 iDRAC9 with LC 3.40.40.40 NA Compatibility for Dell Remote Management Products The following table describes the compatibility for Dell remote management products. Table 8. Remote Management Products Product Name iDRAC9 with LC Version 3.
