Reference Guide

Possible memory module event cause: <list of causes>
Severity Critical
Cause
A Critical event was detected on the Non-Volatile Dual In-line Memory Module (NVDIMM) device.
Event ID — 1438
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause
An Informational event was detected on the Non-Volatile Dual In-line Memory Module (NVDIMM) device.
Hardware Log Sensor Messages
The hardware logs provide hardware status messages to systems management software. On certain systems, the hardware log is
implemented as a circular queue. When the log becomes full, the oldest status messages are overwritten when new status messages are
logged. On some systems, the log is not circular. On these systems, when the log becomes full, subsequent hardware status messages are
lost. Hardware log sensor messages listed provides status and warning information about the noncircular logs that may fill up, resulting in
lost status messages.
Event ID — 1550
Description
Log monitoring has been disabled
Log type: <Log type>
Severity Warning
Cause A hardware log sensor in the specified system is disabled. The log type information is provided.
Event ID — 1551
Description
Log status is unknown
Log type: <Log type>
Severity Information
Cause A hardware log sensor in the specified system could not obtain a reading. The log type information is provided.
Event ID — 1552
Description
Log size is no longer near or at capacity
Log type: <Log type>
Severity Information
Cause The hardware log on the specified system is no longer near or at its capacity, usually as the result of clearing the
log. The log type information is provided.
Server Management Messages 43