Reference Guide

Configuration error type:<type of configuration error>
Severity Error
Cause A power supply has been disconnected or has failed. The sensor location, chassis location, previous state, power
supply type, additional power supply status, and configuration error type information are provided.
Memory Device Messages
The memory device messages listed provides status and warning information for memory modules present in a particular system. Memory
devices determine health status by monitoring the ECC memory correction rate and the type of memory events that have occurred.
NOTE: A critical status does not always indicate a system failure or loss of data. In some instances, the system has
exceeded the ECC correction rate. Although the system continues to function, you should perform system maintenance
as described.
NOTE: The <status> can be either critical or non-critical.
Event ID — 1400
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device monitoring has been disabled. The memory module may not be correctly seated, wrongly
configured, or has failed.
Event ID — 1401
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is unknown. The memory module may not be correctly seated, wrongly configured, or has
failed.
Event ID — 1402
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is normal. The memory device identified in the message has returned to a normal state.
Event ID — 1403
Description
Memory device status is <status>
Memory device location: <location in chassis>
Server Management Messages 39