Reference Guide

Discrete voltage state: <State>
Severity Error
Cause A current sensor in the specified system exceeded its failure threshold. The sensor location, chassis location,
previous state, and current sensor value are provided.
Event ID — 1205
Description
Current sensor detected a non-recoverable value Sensor location: <Location in
chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
If sensor type is not discrete:
Current sensor value (in Amps): <Reading> OR
Current sensor value (in Watts): <Reading>
If sensor type is discrete:
Discrete voltage state: <State>
Severity Error
Cause A current sensor in the specified system detected an error from which it cannot recover. The sensor location,
chassis location, previous state, and current sensor value are provided.
Chassis Intrusion Messages
The chassis intrusion messages listed are a security measure. Chassis intrusion means that someone is opening the cover to a system’s
chassis. Alerts are sent to prevent unauthorized removal of parts from a chassis.
Event ID — 1251
Description
Chassis intrusion sensor value unknown Sensor location: <Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
Chassis intrusion state: <Intrusion state>
Severity Warning
Cause A chassis intrusion sensor in the specified system could not obtain a reading. The sensor location, chassis location,
previous state, and chassis intrusion state are provided.
Event ID — 1252
Description
Chassis intrusion returned to normal Sensor location: <Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
Chassis intrusion state: <Intrusion state>
Severity Information
Cause A chassis intrusion sensor in the specified system detected that a cover was opened while the system was
operating but has since been replaced. The sensor location, chassis location, previous state, and chassis intrusion
state information is provided.
34 Server Management Messages