Reference Guide

Description Line
Item
Previous redundancy state was: <State>
Explanation Specifies the status of the previous redundancy message, for example: Previous redundancy state
was: Lost
Description Line
Item
Previous state was:<State>
Explanation Specifies the previous state of the sensor, for example: Previous state was: OK (Normal)
Description Line
Item
Processor sensor status: <status>
Explanation Specifies the status of the processor sensor, for example: Processor sensor status: Configuration
error
Description Line
Item
Redundancy unit: <Redundancy location in chassis>
Explanation Specifies the location of the redundant power supply or cooling unit in the chassis, for example: Redundancy
unit: Fan Enclosure
Description Line
Item
SD card device type: <Type of SD card device>
Explanation Specifies the type of SD card device, for example: SD card device type: Hypervisor
Description Line
Item
SD card state: <State of SD card>
Explanation Specifies the state of the SD card, for example: SD card state: Present, Active
Description Line
Item
Sensor location: <Location in chassis>
Explanation Specifies the location of the sensor in the specified chassis, for example: Sensor location: CPU1
Description Line
Item
Temperature sensor value: <Reading>
Explanation Specifies the temperature in degrees Celsius, for example: Temperature sensor value (in degrees
Celsius): 30
Description Line
Item
Voltage sensor value (in Volts):<Reading>
Explanation Specifies the voltage sensor value in volts, for example: Voltage sensor value (in Volts): 1.693
22 Introduction