Reference Guide

Description Line
Item
Discrete current state: <State>
Explanation Specifies the state of the current sensor, for example: Discrete current state: Good
Description Line
Item
Discrete temperature state: <State>
Explanation Specifies the state of the temperature sensor, for example: Discrete temperature state: Good
Description Line
Item
Discrete voltage state: <State>
Explanation Specifies the state of the voltage sensor, for example: Discrete voltage state: Good
Description Line
Item
Fan sensor value: <Reading>
Explanation Specifies the fan speed in revolutions per minute (RPM) or On/Off, for example: Fan sensor value (in
RPM): 2600
Fan sensor value: Off
Description Line
Item
Log type: <Log type>
Explanation Specifies the type of hardware log, for example: Log type: ESM
Description Line
Item
Memory device bank location: <Bank name in chassis>
Explanation Specifies the name of the memory bank in the system that generated the message, for example: Memory
device bank location: Bank_1
Description Line
Item
Memory device location: <Device name in chassis>
Explanation Specifies the location of the memory module in the chassis, for example: Memory device location:
DIMM_A
Description Line
Item
Number of devices required for full redundancy: <Number>
Explanation Specifies the number of power supply or cooling devices required to achieve full redundancy, for example:
Number of devices required for full redundancy: 4
Description Line
Item
Peak value (in Watts):<Reading>
Explanation Specifies the peak value in Watts, for example: Peak value (in Watts): 1.693
Description Line
Item
Possible memory module event cause: <list of causes>
Explanation Specifies a list of possible causes for the memory module event, for example: Possible memory module
event cause:
Single bit warning error rate exceeded
Single bit error logging disabled
Description Line
Item
Power Supply type: <type of power supply>
Explanation Specifies the type of power supply, for example: Power Supply type: VRM
Introduction 21