Reference Guide

Description Severity Cause
The system performance
degraded because power
capacity has changed.
Warning This event is generated when change in
power supply degrades system
performance.
The system performance
degraded because of user-
defined power capacity has
changed.
Warning This event is generated when change in
power supply degrades system
performance.
The system halted because
system power exceeds capacity.
Critical This event is generated when there is
inefficient power for the system.
The system performance
degraded because power exceeds
capacity.
Warning This event is generated when system power
is inefficient causing system performance to
degrade.
The system performance
degraded because power draw
exceeds the power threshold.
Critical This event is generated when system power
is inefficient causing system performance to
degrade.
The system performance
restored
Information This event is generated when system
performance was restored.
Entity Presence Events
The entity presence messages are used for detecting different hardware devices.
Table 22. Entity Presence Events
Description Severity Cause
<Device Name> presence was
asserted
Information This event is generated when the device
was detected.
<Device Name> absent was
asserted
Critical This event is generated when the device
was not detected.
The <Device Name> is present.
Information This event is generated when the device
was detected.
The <Device Name> is absent.
Critical This event is generated when the device
was not detected.
Miscellaneous Events
The following table provides events related to hardware and software components like mezzanine cards, sensors, firmware etc. and
compatibility issues.
Table 23. Miscellaneous Events
Description Severity Cause
System Board Video Riser:
Module sensor for System
Board, device removed was
asserted
Critical This event is generated when the required
module is removed.
Mezz B<slot number> Status:
Add-in Card sensor for Mezz
B<slot number>, install error
was asserted
Critical This event is generated when an incorrect
Mezzanine card is installed for I/O fabric.
Mezz C<slot number> Status:
Add-in Card sensor for Mezz
Critical This event is generated when an incorrect
Mezzanine card is installed for I/O fabric.
196 System Event Log Messages for IPMI Systems