Reference Guide

Event Message Severity Cause
Memory mirror is redundant.
Information This event is generated when the memory
redundancy mode has change to mirror
redundant.
Memory mirror redundancy is
lost. Check memory device at
location(s) <DIMM number>.
Critical This event is generated when redundancy is
lost in a mirror-configured memory
configuration.
Memory mirror redundancy is
degraded. Check memory device
at location <DIMM number >.
Warning This event is generated when there is a
memory failure in a mirror-configured
memory configuration.
Memory spare is redundant.
Information This event is generated when the memory
redundancy mode has change to spare
redundant.
Memory spare redundancy is
lost. Check memory device at
location <DIMM number>.
Critical This event is generated when redundancy is
lost in a sparer-configured memory
configuration.
Memory spare redundancy is
degraded. Check memory device
at location <DIMM number>.
Warning This event is generated when there is a
memory failure in a spare-configured
memory configuration.
Hardware Log Sensor Events
The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent
hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full.
Table 13. Hardware Log Sensor Events
Event Message Severity Cause
Log full detected.
Critical This event is generated when the SEL
device detects that only one entry can be
added to the SEL before it is full.
Log cleared.
Information This event is generated when the SEL is
cleared.
Drive Events
The drive event messages monitor the health of the drives in a system. These events are generated when there is a fault in the drives
indicated.
Table 14. Drive Events
Event Message Severity Cause
Drive <Drive #> asserted fault
state.
Critical This event is generated when the specified
drive in the array is faulty.
Drive <Drive #> de-asserted
fault state.
Information This event is generated when the specified
drive recovers from a faulty condition.
Drive <Drive #> drive presence
was asserted.
Information This event is generated when the drive is
installed.
Drive <Drive #> predictive
failure was asserted.
Warning This event is generated when the drive is
about to fail.
Drive <Drive #> predictive
failure was deasserted.
Information This event is generated when the drive
from earlier predictive failure is corrected.
186 System Event Log Messages for IPMI Systems