Reference Guide

Event Message Severity Cause
Fault detected on drive <Drive
#>.
Critical This event is generated when the specied
drive in the array is faulty.
Intrusion Events
The chassis intrusion messages are a security measure. Chassis intrusion alerts are generated when the system's chassis is opened. Alerts
are sent to prevent unauthorized removal of parts from the chassis.
Table 15. Intrusion Events
Event Message Severity Cause
<Intrusion sensor Name> sensor
detected an intrusion.
Critical This event is generated when the intrusion
sensor detects an intrusion.
<Intrusion sensor Name> sensor
returned to normal state.
Information This event is generated when the earlier
intrusion has been corrected.
<Intrusion sensor Name> sensor
intrusion was asserted while
system was ON.
Critical This event is generated when the intrusion
sensor detects an intrusion while the system
is on.
<Intrusion sensor Name> sensor
intrusion was asserted while
system was OFF.
Critical This event is generated when the intrusion
sensor detects an intrusion while the system
is o.
The chassis is open.
Critical This event is generated when the intrusion
sensor detects an intrusion.
The chassis is closed.
Information This event is generated when the earlier
intrusion has been corrected.
The chassis is open while the
power is on.
Critical This event is generated when the intrusion
sensor detects an intrusion while the system
is on.
The chassis is closed while
the power is on.
Information This event is generated when the earlier
intrusion has been corrected while the
power is on.
The chassis is open while the
power is off.
Critical This event is generated when the intrusion
sensor detects an intrusion while the system
is o.
The chassis is closed while
the power is off.
Information This event is generated when the earlier
intrusion has been corrected while the
power is o.
System Event Log Messages for IPMI Systems 227