Support Matrix
• T640
• R940
• C6420
DRAC also logs event data and the most recent crash screen (for systems running the Microsoft Windows operating system only) to help
diagnose the probable cause of a system crash.
For more information, see the Dell Remote Access Controller User's Guide or the Integrated Dell Remote Access Controller User's Guide at
dell.com/support/manuals.
Table below “Remote Access Controllers and Solutions for Blade Servers” and Table “For Rack and Tower Servers” list the following:
• Supported Remote Access Controller versions and rmware for iDRAC8
• Supported Chassis Management Controller versions and rmware
• Supported BMC rmware versions
• Supported IPMI protocol versions
iDRAC Service Module 3.2
The Integrated Dell Remote Access Controller(iDRAC) Service Module is a lightweight optional software application that can be installed on
14
th
generation of Dell PowerEdge servers or later with minimum Firmware version of 3.11.11.11 for iDRAC9. The iDRAC Service Module
complements iDRAC interfaces – Graphical User Interface (GUI), RACADM CLI and Web Service Management (WS-MAN) with additional
monitoring data. You can congure the features on the supported operating system depending on the features to be installed and the
unique integration needs in a work environment.
The iDRAC Service Module architecture uses IP socket communication and provides additional Server Management data (OS/device
driver) to iDRAC and presents one-to-many consoles with access to Systems Management data through OS standard interfaces.
Supported Remote Access Controllers and Solutions
for Blade Servers
The following table lists the supported Remote Access Controllers and Solutions for blade servers.
Table 12. Supported Remote Access Controllers and Solutions for Blade Servers
Dell Systems DRACs MSM Firmware BMC Supported
IPMI
DRAC Type Supported
DRAC FW
version
MX7000 MSM VRTX MSM FX2 MSM
14th generation servers
MX740c iDRAC9 3.20.20.20 6.0 3.0 2.0 N/A 2.0
MX840c iDRAC9 3.20.20.20 6.0 3.0 2.0 N/A 2.0
Lifecycle Controller — Supported Dell Systems and
Operating Systems
The Dell Lifecycle Controller provides advanced embedded systems management and is delivered as part of integrated Dell Remote Access
Controller (iDRAC) and embedded Unied Extensible Firmware Interface (UEFI) applications in the 14th generation of Dell PowerEdge
servers.
The Lifecycle Controller software components are built on iDRAC and UEFI system rmware. Lifecycle Controller rmware can access and
manage the hardware, including component and sub- system management that is beyond the traditional Baseboard Management
14
Out-of-band server management and monitoring