Reference Guide

Storage Object Message Variables

For example, 2122 Redundancy degraded: Power Supply 1, Controller 1, Connector 0, Target ID 6

SAS Power Supply

Message Format: Power Supply X Controller A, Connector B, Enclosure C

For example, 2312 A power supply in the enclosure has an AC failure: Power Supply 1, Controller 1,

Connector 0, Enclosure 2

SCSI Temperature Probe

Message Format: Temperature Probe X Controller A, Connector B, Target ID C

where C is the SCSI ID number of the EMM managing the temperature probe.

For example, 2101 Temperature dropped below the minimum warning threshold: Temperature Probe 1,

Controller 1, Connector 0, Target ID 6

SAS Temperature Probe

Message Format: Temperature Probe X Controller A, Connector B, Enclosure C

For example, 2101 Temperature dropped below the minimum warning threshold: Temperature Probe 1,

Controller 1, Connector 0, Enclosure 2

SCSI Fan

Message Format: Fan X Controller A, Connector B, Target ID C

where C is the SCSI ID number of the EMM managing the fan.

For example, 2121 Device returned to normal: Fan 1, Controller 1, Connector 0, Target ID 6

SAS Fan

Message Format: Fan X Controller A, Connector B, Enclosure C

For example, 2121 Device returned to normal: Fan 1, Controller 1, Connector 0, Enclosure 2

SCSI EMM

Message Format: EMM X Controller A, Connector B, Target ID C

where C is the SCSI ID number of the EMM.

For example, 2121 Device returned to normal: EMM 1, Controller 1, Connector 0, Target ID 6

SAS EMM

Message Format: EMM X Controller A, Connector B, Enclosure C

For example, 2121 Device returned to normal: EMM 1, Controller 1, Connector 0, Enclosure 2

Alert Descriptions and Corrective Actions

The following sections describe alerts generated by the RAID or SCSI controllers supported by Storage Management. The alerts are

displayed in the Server Administrator Alert tab or through Windows Event Viewer. These alerts can also be forwarded as SNMP traps to

other applications.

SNMP traps are generated for the alerts listed in the following sections. These traps are included in the Server Administrator Storage

Management, management information base (MIB). The SNMP traps for these alerts use all of the SNMP trap variables. For more

information on SNMP support and the MIB, see the SNMP Reference Guide.

To locate an alert, scroll through the following table to nd the alert number displayed on the Server Administrator Alert tab or search this

le for the alert message text or number. See Understanding Event Messages for more information on severity levels.

For more information regarding alert descriptions and the appropriate corrective actions, see the online help.

Storage Management Message Reference