Reference Guide

Cause A memory device correction rate exceeded an acceptable value. The memory device status and possible memory
module event cause information is provided.
Event ID — 1404
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Error
Cause A memory device correction rate exceeded an acceptable value, a memory spare bank was activated, or a multi-bit
ECC error occurred. The system continues to function normally (except for a multi-bit error). Replace the memory
module identied in the message during the system’s next scheduled maintenance. Clear the memory error on
multi-bit ECC error. The memory device status and possible memory module event cause information is provided.
Event ID — 1405
Description
Memory device status is <status>
Memory device location: <location in chassis>
Possible memory module event cause: <list of causes>
Severity Informational
Cause Memory device status is nonrecoverable. The memory module failed because of an irrecoverable error.
Event ID — 1425
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, has regained
persistency and is available for use.
Severity Informational
Cause No response action required.
Event ID — 1426
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, is about to reach the
end of supported life duration.
Severity Warning
Cause During the next scheduled maintenance, replace the Non-Volatile Dual In-line Memory Module (NVDIMM) device.
For more information about the usage of NVDIMMs, see the system Owner's Manual on the support site.
46 Server Management Messages