Reference Guide

Hardware Log Sensor Events
The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent
hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full.
Table 13. Hardware Log Sensor Events
Event Message Severity Cause
Log full detected.
Critical This event is generated when the SEL
device detects that only one entry can be
added to the SEL before it is full.
Log cleared.
Information This event is generated when the SEL is
cleared.
Drive Events
The drive event messages monitor the health of the drives in a system. These events are generated when there is a fault in the drives
indicated.
Table 14. Drive Events
Event Message Severity Cause
Drive <Drive #> asserted fault
state.
Critical This event is generated when the specied
drive in the array is faulty.
Drive <Drive #> de-asserted
fault state.
Information This event is generated when the specied
drive recovers from a faulty condition.
Drive <Drive #> drive presence
was asserted.
Information This event is generated when the drive is
installed.
Drive <Drive #> predictive
failure was asserted.
Warning This event is generated when the drive is
about to fail.
Drive <Drive #> predictive
failure was deasserted.
Information This event is generated when the drive from
earlier predictive failure is corrected.
Drive <Drive #> hot spare was
asserted.
Warning This event is generated when the drive is
placed in a hot spare.
Drive <Drive #> hot spare was
deasserted.
Information This event is generated when the drive is
taken out of hot spare.
Drive <Drive #> consistency
check in progress was
asserted.
Warning This event is generated when the drive is
placed in consistency check.
Drive <Drive #> consistency
check in progress was
deasserted.
Information This event is generated when the
consistency check of the drive is completed.
Drive <Drive #> in critical
array was asserted.
Critical This event is generated when the drive is
placed in critical array.
Drive <Drive #> in critical
array was deasserted.
Information This event is generated when the drive is
removed from critical array.
226 System Event Log Messages for IPMI Systems