Reference Guide
Event Message Severity Cause
<Processor Entity>
configuration error was
deasserted.
Information This event is generated when the earlier
processor conguration error was corrected.
<Processor Entity> throttled
was asserted.
Warning This event is generated when the processor
slows down to prevent overheating.
<Processor Entity> throttled
was deasserted.
Information This event is generated when the earlier
processor throttled event was corrected.
CPU <number> has an internal
error (IERR).
Critical The specied CPU generated an internal
error.
CPU <number> has a thermal
trip (over-temperature) event.
Critical The CPU generates this event before it
shuts down because of excessive heat
caused by lack of cooling or heat
synchronization.
CPU <number> configuration is
unsupported.
Warning The specied CPU is not support for this
system.
CPU <number> is present.
Information The specied CPU is present.
CPU <number> terminator is
present.
Information This event is generated if the terminator is
present on a processor slot.
CPU <number> terminator is
absent.
Warning This event is generated if the terminator is
missing on an empty processor slot.
CPU <number> is throttled.
Warning This event is generated when the processor
slows down to prevent overheating.
CPU <number> is absent.
Critical This event is generated when the system
could not detect the processor.
CPU <number> is operating
correctly.
Information This event is generated when the processor
recovered from an error.
CPU <number> is configured
correctly.
Information The specied CPU is congured correctly.
Power Supply Events
The power supply sensors monitor the functionality of the power supplies. These messages provide status and warning information for
power supplies for a particular system.
Table 9. Power Supply Events
Event Message Severity Cause
<Power Supply Sensor Name>
power supply sensor removed.
Critical This event is generated when the power
supply sensor is removed.
<Power Supply Sensor Name>
power supply sensor AC
recovered.
Information This event is generated when the power
supply has been replaced.
System Event Log Messages for IPMI Systems 219