Reference Guide

Event Message Severity Cause
Fan redundancy is lost.
Critical One or more required fans may have failed
or removed and hence, the redundancy was
lost.
Fan redundancy is degraded.
Warning One or more fans may have failed or
removed and hence, the redundancy has
been degraded.
Processor Status Events
The processor status messages monitor the functionality of the processors in a system. These messages provide processor health and
warning information of a system.
Table 8. Processor Status Events
Event Message Severity Cause
<Processor Entity> status
processor sensor IERR, where
<Processor Entity> is the
processor that generated the
event. For example, PROC for a
single processor system and
PROC # for multiprocessor
system.
Critical IERR internal error generated by the
<Processor Entity>. This event is generated
due to processor internal error.
<Processor Entity> status
processor sensor Thermal Trip.
Critical The processor generates this event before it
shuts down because of excessive heat
caused by lack of cooling or heat
synchronization.
<Processor Entity> status
processor sensor recovered
from IERR.
Information This event is generated when a processor
recovers from the internal error.
<Processor Entity> status
processor sensor disabled.
Warning This event is generated for all processors
that are disabled.
<Processor Entity> status
processor sensor terminator
not present.
Information This event is generated if the terminator is
missing on an empty processor slot.
<Processor Entity> presence
was deasserted.
Critical This event is generated when the system
could not detect the processor.
<Processor Entity> presence
was asserted.
Information This event is generated when the earlier
processor detection error was corrected.
<Processor Entity> thermal
tripped was deasserted.
Information This event is generated when the processor
has recovered from an earlier thermal
condition.
<Processor Entity>
configuration error was
asserted.
Critical This event is generated when the processor
conīš‚guration is incorrect.
218 System Event Log Messages for IPMI Systems