Reference Guide

Event ID — 2300
Description The enclosure is unstable.
Severity Critical / Failure / Error
Cause and Action Cause: The controller is not receiving a consistent response from the enclosure. There could be a rmware problem
or an invalid cabling conguration. If the cables are too long, they degrade the signal.
Action: Power down all enclosures attached to the system and reboot the system. If the problem persists, upgrade
the rmware to the latest supported version. You can download the most current version of the driver and
rmware from the support site. Make sure the cable conguration is valid. See the hardware documentation for
valid cabling congurations.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2091
SNMP Trap
Numbers
854
Event ID — 2301
Description
The enclosure has a hardware error.
Severity Critical / Failure / Error
Cause and Action Cause: The enclosure or an enclosure component is in a Failed or Degraded state.
Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See
the hardware documentation for more information.
Related Alert
Information
Clear Alert Number: None
Related Alert Number: None
Local Response Agent (LRA) Number: 2091
SNMP Trap
Numbers
854
Event ID — 2302
Description
The enclosure is not responding.
Severity Critical / Failure / Error
Cause and Action Cause: The enclosure or an enclosure component is in a Failed or Degraded state.
Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See
the hardware documentation for more information.
Storage Management Message Reference 149