Connectivity Guide

Description Description Indicates whether the controller supports the T10 PI (Protection Information).
These protection fields are known as DIF (Data Integrity Fields).Possible values:
1. Not one of the following.
2. Capable of supporting T10 PI.
3. Not capable of supporting T10 PI.
Syntax INTEGER
Access read-only
Table 240. Controller RAID10 Uneven Spans Supported
Name
controllerRAID10UnevenSpansSupported
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.81
Description Indicates whether uneven spans for RAID 10 virtual disk is supported on the controller.
Syntax BooleanType
Access read-only
Table 241. Controller Enhanced Auto Import Foreign Config Mode
Name
controllerEnhancedAutoImportForeignConfigMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.82
Description Indicates the status of enhanced auto-import of foreign configuration property of the
controller. Possible values:
1. Not one of the following.
2. Not Supported.
3. Disabled.
4. Enabled.
Syntax INTEGER
Access read-only
Table 242. Controller Boot Mode Supported
Name
controllerBootModeSupported
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.83
Description Indicates whether headless boot mode settings are supported on the controller.
Syntax BooleanType
Access read-only
Table 243. Controller Boot Mode
Name
controllerBootMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.84
Description Indicates the boot mode of the controller. Possible values:
1. Not applicable for this controller.
2. User mode: User interaction required for all boot messages (not applicable for uEFI
environments).
3. Continue Boot On Error. User interaction only required for critical messages.
4. Headless Mode Continue On Error. User interaction is not required. Controller boot may
halt on Error.
5. Headless Safe Mode. Controller shall boot to safe mode on critical errors.
Syntax INTEGER
Access read-only
58 iDRAC MIB