Reference Guide
Event ID — 1016
Description
Server Based Management Mode is disabled
Severity Information
Cause This event is generated when the server-based management mode is disabled.
Temperature Sensor Messages
The temperature sensors listed help protect critical components by alerting the systems management console when temperatures
become too high inside a chassis. The temperature sensor messages use more variables: sensor location, chassis location, previous
state, and temperature sensor value or state.
Event ID — 1050
Description
Temperature sensor has failed Sensor location: <Location in chassis>
Chassis location: <Name of chassis>
Previous state was: <State>
If sensor type is not discrete:
Temperature sensor value (in degrees Celsius): <Reading>
If sensor type is discrete:
Discrete temperature state: <State>
Severity Error
Cause A temperature sensor on the backplane board, system board, or the carrier in the specied system failed.
The sensor location, chassis location, previous state, and temperature sensor value are provided.
Event ID — 1051
Description
Temperature sensor value unknown Sensor location: <Location in chassis>
Chassis location: <Name of chassis>
If sensor type is not discrete:
Temperature sensor value (in degrees Celsius): <Reading>
If sensor type is discrete:
Discrete temperature state: <State>
Severity Warning
Cause A temperature sensor on the backplane board, system board, or drive carrier in the specied system could
not obtain a reading. The sensor location, chassis location, previous state, and a nominal temperature sensor
value information is provided.
28