Reference Guide
Modied Alerts None
Storage Management 3.3
Product Versions to which changes apply
Storage Management 3.3.0
Server Administrator 6.3.0
New Alerts
2394, 2395, 2396, 2397, 2398, 2399, 2400, 2401, 2402, 2403, 2404
Deleted Alerts None
Modied Alerts Alert severity changed for 1151 and 1351
Storage Management 3.2
Product Versions to which changes apply
Storage Management 3.2.0
Server Administrator 6.2.0
New Alerts
2387, 2388, 2389, 2390, 2392, 2393
Deleted Alerts None
Modied Alerts None
Messages Not Described in This Guide
This guide describes only event messages logged by Server Administrator and Storage Management that are displayed in the Server
Administrator alert log. For information on other messages generated by your system, see one of the following sources:
• The Installation and Troubleshooting Guide or Hardware Owner's Manual shipped with your system
• Operating system documentation
• Application program documentation
Understanding Event Messages
Add your section content here.This section describes the various types of event messages generated by the Server Administrator.
When an event occurs on your system, Server Administrator sends information about one of the following event types to the
systems management console:
Table 2. Understanding Event Messages
Icon Alert Severity Component Status
OK /Normal /
Informational
An event that describes the successful operation of a unit.
The alert is provided for informational purposes and does not
indicate an error condition. For example, the alert may
indicate the normal start or stop of an operation, such as
power supply or a sensor reading returning to normal.
Warning / Non-critical An event that is not necessarily signicant, but may indicate
a possible future problem. For example, a Warning/Non-
critical alert may indicate that a component (such as a
temperature probe in an enclosure) has crossed a warning
threshold.
Critical / Failure / Error A signicant event that indicates actual or imminent loss of
data or loss of function. For example, crossing a failure
threshold or a hardware failure such as an array disk.
Server Administrator generates events based on status changes in the following sensors:
18