Server Administrator Version 8.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction....................................................................................................................16 New in this release............................................................................................................................................................ 16 Alert Message Change History..........................................................................................................................................
Cooling Device Messages.................................................................................................................................................30 Event ID — 1100........................................................................................................................................................ 30 Event ID — 1101..........................................................................................................................................................
Hardware Log Sensor Messages...................................................................................................................................... 43 Event ID — 1550........................................................................................................................................................43 Event ID — 1551.........................................................................................................................................................
Event ID — 2058....................................................................................................................................................... 57 Event ID — 2059....................................................................................................................................................... 57 Event ID — 2060.......................................................................................................................................................
Event ID — 2115.........................................................................................................................................................73 Event ID — 2116.........................................................................................................................................................73 Event ID — 2117.........................................................................................................................................................
Event ID — 2163........................................................................................................................................................89 Event ID — 2164........................................................................................................................................................89 Event ID — 2165........................................................................................................................................................
Event ID — 2210...................................................................................................................................................... 104 Event ID — 2211....................................................................................................................................................... 105 Event ID — 2212......................................................................................................................................................
Event ID — 2255...................................................................................................................................................... 119 Event ID — 2257...................................................................................................................................................... 120 Event ID — 2258......................................................................................................................................................
Event ID — 2302......................................................................................................................................................135 Event ID — 2303......................................................................................................................................................135 Event ID — 2304......................................................................................................................................................
Event ID — 2350...................................................................................................................................................... 151 Event ID — 2351....................................................................................................................................................... 151 Event ID — 2352......................................................................................................................................................
Event ID — 2398......................................................................................................................................................166 Event ID — 2399......................................................................................................................................................166 Event ID — 2400......................................................................................................................................................
Event ID — 2702.......................................................................................................................................................181 Event ID — 2703.......................................................................................................................................................181 Event ID — 2704......................................................................................................................................................
Hardware Log Sensor Events......................................................................................................................................... 203 Drive Events...................................................................................................................................................................203 Intrusion Events.....................................................................................................................................................
1 Introduction OpenManage Server Administrator generates event messages stored primarily in the operating system or Server Administrator event logs and sometimes in Simple Network Management Protocol (SNMP) traps. This document describes the event messages that are created by Server Administrator version 8.5 and displayed in the Server Administrator alert log. Server Administrator creates events in response to sensor status changes and other monitored parameters.
New Alerts 2699, 2700, 2701, 2702, 2703, 2704, 2705, 2874, 2875, 2876, 2900, 2901, 2902, 2903, 2904, 2905, 2906, 2907, 2908, 2909, 2910, 2911, 2912, 2913, 2914, 2915, 2916, 2917, 2918, 2919, 2920, 2921, 2922, 2923, 2924, 2930, 2931, 2932, 2933 Deleted Alerts None Modified Alerts None Storage Management 4.2 Product Versions to which changes apply Storage Management 4.2.0 Server Administrator 7.2.
Modified Alerts None Storage Management 3.3 Product Versions to which changes apply Storage Management 3.3.0 Server Administrator 6.3.0 New Alerts 2394, 2395, 2396, 2397, 2398, 2399, 2400, 2401, 2402, 2403, 2404 Deleted Alerts None Modified Alerts Alert severity changed for 1151 and 1351 Storage Management 3.2 Product Versions to which changes apply Storage Management 3.2.0 Server Administrator 6.2.
• Temperature Sensor — Helps protect critical components by alerting the systems management console when temperatures become too high inside a chassis; also monitors the temperature in a variety of locations in the chassis and in attached system(s). • Fan Sensor — Monitors fans in various locations in the chassis and in attached system(s). • Voltage Sensor — Monitors voltages across critical components in various chassis locations and in attached system(s).
You can also view the event log using your operating system’s event viewer. Each operating system’s event viewer accesses the applicable operating system event log. The location of the event log file depends on the operating system you are using. • On systems running the Microsoft Windows operating systems, event messages are logged in the operating system event log and the Server Administrator event log. NOTE: The Server Administrator event log file is named dcsys32.
The following example shows the Red Hat Enterprise Linux and SUSE Linux Enterprise Server message log, /var/log/messages. The text in boldface type indicates the message text. NOTE: These messages are typically displayed as one long line. In the following example, the message is displayed using line breaks to help you see the message text more clearly.
Description Line Item Additional Details: Explanation Specifies additional details available for the hot plug event, for example: Memory device: DIMM1_A Serial number: FFFF30B1 Description Line Item Explanation Specifies information pertaining to the event, for example: Power supply input AC is off, Power supply POK (power OK) signal is not normal, Power supply is turned off Description Line Item Chassis intrusion state
Description Line Item Discrete voltage state: Explanation Specifies the state of the voltage sensor, for example: Discrete voltage state: Good Description Line Item Fan sensor value: Explanation Specifies the fan speed in revolutions per minute (RPM) or On/Off, for example: Fan sensor value (in RPM): 2600 Fan sensor value: Off Description Line Item Log type: Explanation Specifies the type of hardware log, for example: Log type: ESM Description Line Item Memory devic
Description Line Item Previous state was: Explanation Specifies the previous state of the sensor, for example: Previous state was: OK (Normal) Description Line Item Processor sensor status: Explanation Specifies the status of the processor sensor, for example: Processor sensor status: Configuration error Description Line Item Redundancy unit: Explanation Specifies the location of the redundant power supply or cooling unit in the chassis, for exampl
2 Server Management Messages The following tables lists in numerical order each event ID and its corresponding description, along with its severity and cause. NOTE: For corrective actions, see the appropriate documentation. Server Administrator General Messages The messages below indicate that certain alert systems are up and working. Event ID — 0000 Description Log was cleared Severity Information Cause User cleared the log from Server Administrator.
Cause The user has chosen to update the flash basic input/output system (BIOS). Event ID – 1003 Description A previously scheduled system BIOS update has been canceled Severity Information Cause The user decides to cancel the flash BIOS update, or an error occurs during the flash. Event ID — 1004 Description Thermal shutdown protection has been initiated Severity Error Cause This message is generated when a system is configured for thermal shutdown due to an error event.
Event ID — 1009 Description Systems Management Data Manager Stopped Severity Information Cause Systems Management Data Manager services were stopped. Event ID — 1011 Description RCI table is corrupt Severity Error Cause This message is generated when the BIOS Remote Configuration Interface (RCI) table is corrupted or cannot be read by the systems management software.
Event ID — 1016 Description Server Based Management Mode is disabled Severity Information Cause This event is generated when the server-based management mode is disabled. Temperature Sensor Messages The temperature sensors listed help protect critical components by alerting the systems management console when temperatures become too high inside a chassis. The temperature sensor messages use more variables: sensor location, chassis location, previous state, and temperature sensor value or state.
Event ID — 1052 Description Temperature sensor returned to a normal value Sensor location: Chassis location: Previous state was: If sensor type is not discrete: Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Information Cause A temperature sensor on the backplane board, system board, or drive carrier in the specified system returned to a valid range after crossing a failure
Temperature sensor value (in degrees Celsius): If sensor type is discrete: Discrete temperature state: Severity Error Cause A temperature sensor on the backplane board, system board, or drive carrier in the specified system exceeded its failure threshold. The sensor location, chassis location, previous state, and temperature sensor value are provided.
Event ID — 1101 Description Fan sensor value unknown Sensor location: Chassis location: Previous state was: Fan sensor value: Severity Error Cause A fan sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal fan sensor value information is provided.
Cause A fan sensor in the specified system detected the failure of one or more fans. The sensor location, chassis location, previous state, and fan sensor value information is provided. Event ID — 1105 Description Fan sensor detected a non-recoverable value Sensor location: Chassis location: Previous state was: Fan sensor value: Severity Error Cause A fan sensor detected an error from which it cannot recover.
If sensor type is discrete: Discrete voltage state: Severity Warning Cause A voltage sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state, and a nominal voltage sensor value are provided.
Chassis location: Previous state was: If sensor type is not discrete: Voltage sensor value (in Volts): If sensor type is discrete: Discrete voltage state: Severity Error Cause A voltage sensor in the specified system exceeded its failure threshold. The sensor location, chassis location, previous state, and voltage sensor value information is provided.
Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Error Cause A current sensor in the specified system failed. The sensor location, chassis location, previous state, and current sensor value are provided.
Event ID — 1203 Description Current sensor detected a warning value Sensor location: Chassis location: Previous state was: If sensor type is not discrete: Current sensor value (in Amps): OR Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Warning Cause A current sensor in the specified system exceeded its warning threshold.
Previous state was: If sensor type is not discrete: Current sensor value (in Amps): OR Current sensor value (in Watts): If sensor type is discrete: Discrete voltage state: Severity Error Cause A current sensor in the specified system detected an error from which it cannot recover. The sensor location, chassis location, previous state, and current sensor value are provided. Chassis Intrusion Messages The chassis intrusion messages listed are a security measure.
Event ID — 1254 Description Chassis intrusion detected Sensor location: Chassis location: Previous state was: Chassis intrusion state: Severity Critical Cause A chassis intrusion sensor in the specified system detected that the system cover was opened while the system was operating. The sensor location, chassis location, previous state, and chassis intrusion state information is provided.
Cause A redundancy sensor in the specified system could not obtain a reading. The redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy are provided.
Cause A redundancy sensor in the specified system detected that one of the components of the redundancy unit has failed but the unit is still redundant. The redundancy unit location, chassis location, previous redundancy state, and the number of devices required for full redundancy information is provided.
If in configuration error state: Configuration error type: Severity Information Cause A power supply has been reconnected or replaced. The sensor location, chassis location, previous state, power supply type, additional power supply status, and configuration error type information are provided.
NOTE: A critical status does not always indicate a system failure or loss of data. In some instances, the system has exceeded the ECC correction rate. Although the system continues to function, you should perform system maintenance as described. NOTE: The can be either critical or non-critical.
Event ID — 1404 Description Memory device status is Memory device location: Possible memory module event cause: Severity Error Cause A memory device correction rate exceeded an acceptable value, a memory spare bank was activated, or a multi-bit ECC error occurred. The system continues to function normally (except for a multi-bit error). Replace the memory module identified in the message during the system’s next scheduled maintenance.
Event ID — 1552 Description Log size is no longer near or at capacity Log type: Severity Information Cause The hardware log on the specified system is no longer near or at its capacity, usually as the result of clearing the log. The log type information is provided. Event ID — 1553 Description Log size is near capacity Log type: Severity Warning Cause The size of a hardware log on the specified system is near or at the capacity of the hardware log.
Processor sensor status: Severity Warning Cause A processor sensor in the specified system could not obtain a reading. The sensor location, chassis location, previous state and processor sensor status information is provided.
Pluggable Device Messages The pluggable device messages listed provides status and error information when some devices, such as memory cards, are added or removed. Event ID — 1650 Description Device plug event type unknown Device location: Chassis Location: Additional details: Severity Information Cause A pluggable device event message of unknown type was received.
Battery Sensor Messages The battery sensors monitor how well a battery is functioning. The battery messages listed provides status and warning information for batteries in a particular chassis. Event ID — 1700 Description Battery sensor has failed Sensor location: Chassis Location: Previous state was: Battery sensor status: Severity Critical/ Failure/Error Cause A battery sensor in the specified system is not functioning.
Chassis Location: Previous state was: Battery sensor status: Severity Warning Cause A battery sensor in the specified system detected that a battery is in a predictive failure state. The sensor location, chassis location, previous state, and battery sensor status information is provided.
SD card state: Severity Error Cause An SD card device sensor in the specified system failed. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device.
Cause An SD card device sensor in the specified system detected a warning condition. The sensor location, chassis location, previous state, and SD card device type information is provided. The SD card state is provided if an SD card is present in the SD card device.
3 Storage Management Message Reference The Server Administrator Storage Management’s alert or event management features let you monitor the health of storage resources such as controllers, enclosures, physical disks, and virtual disks. Alert Monitoring and Logging The Storage Management Service performs alert monitoring and logging. By default, the Storage Management service starts when the managed system starts up. If you stop the Storage Management Service, then alert monitoring and logging stops.
NOTE: Some alert messages relating to an enclosure or an enclosure component, such as a fan or EMM, are generated by the controller when the enclosure or enclosure component ID cannot be determined. NOTE: A, B, C and X, Y, Z in the following examples are variables representing the storage object name or number. Table 4.
Storage Object Message Variables For example, 2101 Temperature dropped below the minimum warning threshold: Temperature Probe 1, Controller 1, Connector 0, Enclosure 2 Message Format: Fan X Controller A, Connector B, Target ID C SCSI Fan where C is the SCSI ID number of the EMM managing the fan.
SNMP Trap Numbers 754, 804, 854, 904, 954, 1004, 1054, 1104, 1154, 1204 Event ID — 2049 Description Physical disk removed. Severity Warning / Non-critical Cause and Action Cause: A physical disk has been removed from the disk group. This alert can also be caused by loose or defective cables or by problems with the enclosure. Action: If a physical disk was removed from the disk group, either replace the disk or restore the original disk. On some controllers, a removed disk has a red X for its status.
Action: Replace the degraded physical disk. You can identify which disk is degraded by locating the disk that has a Yellow Triangle for its status. Perform a rescan after replacing the disk. Related Alert Information Clear Alert Number: None Related Alert Number: 2094 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2052 Description Physical disk inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2080 SNMP Trap Numbers 1201 Event ID — 2055 Description Virtual disk configuration changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Cause and Action Cause 1: This alert message occurs when a physical disk included in a redundant virtual disk fails. Because the virtual disk is redundant (uses mirrored or parity information) and only one physical disk has failed, the virtual disk can be rebuilt. Action 1: Replace the failed drive. Rebuild of the virtual disk starts automatically. NOTE: If you put the drive in a different slot, you need to assign it as a hot spare for the rebuild to start automatically.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2060 Description Copy of data started from physical disk % 2 to physical disk % 1. Severity OK / Normal /Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2075 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2061 Description Virtual disk initialization started.
SNMP Trap Numbers 901 Event ID — 2063 Description Virtual disk reconfiguration started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2090 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2064 Description Virtual disk rebuild started.
Event ID — 2067 Description Virtual disk check consistency cancelled. Severity OK / Normal / Informational Cause and Action Cause: The check consistency operation was cancelled because a physical disk in the array has failed or because a user cancelled the check consistency operation. Action: If the physical disk failed, then replace the physical disk. You can identify which disk failed by locating the disk that has a red “X” for its status. Perform a rescan after replacing the disk.
SNMP Trap Numbers 901 Event ID — 2075 Description Copy of data completed from physical disk % 2 to physical disk % 1. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2076 Description Virtual disk Check Consistency failed.
Local Response Agent (LRA) Number: 2081 SNMP Trap Numbers 1204 Event ID — 2079 Description Virtual disk initialization failed. Severity Critical / Failure / Error Cause and Action Cause: A physical disk included in the virtual disk has failed or a user has cancelled the initialization.
If the physical disk is part of a redundant array, then rebuild the physical disk. When finished, restart the reconfiguration. Software RAID: Related Alert Information • Perform a backup with the Verify option. • If the file backup fails, try to restore the failed file from a previous backup. • When the backup with the Verify option is complete without any errors, delete the Virtual Disk. • Recreate a new Virtual Disk with new drives. • Restore the data from backup.
SNMP Trap Numbers 904 Event ID — 2085 Description Virtual disk check consistency completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2085 is a clear alert for alert 2058. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2086 Description Virtual disk format completed.
Event ID — 2088 Description Virtual disk initialization completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2088 is a clear alert for alerts 2061 and 2136. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2089 Description Physical disk initialization completed.
Event ID — 2091 Description Virtual disk rebuild completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2091 is a clear alert for alert 2064. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2092 Description Physical disk rebuild completed.
CAUTION: If this disk is part of a non-redundant disk, back up your data immediately. If the disk fails, you cannot recover the data. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2095 Description SCSI sense data %1. Severity OK / Normal / Informational Cause and Action Cause: A SCSI device experienced an error, but may have recovered.
rebuilt, the hot spare becomes a member of the virtual disk and is no longer assigned as a hot spare. You need to assign a new hot spare to maintain data protection in this situation. On the CERC SATA1.5/6 ch, and CERC SATA1.5/2s controllers, if you use another application such as the BIOS to include a hot spare in a virtual disk, then Storage Management unassigns the physical disk as a hot spare.
Event ID — 2102 Description Temperature exceeded the maximum failure threshold. Severity Critical / Failure / Error Cause and Action Cause: The physical disk enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot. Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working.
SNMP Trap Numbers 1151 Event ID — 2105 Description Controller battery recondition is completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2105 is a clear alert for alert 2104. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2106 Description SMART FPT exceeded.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2071 SNMP Trap Numbers 904 Event ID — 2108 Description SMART warning. Severity Warning / Non-critical Cause and Action Cause: A disk has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert.
Related Alert Number: None Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2110 Description SMART warning degraded. Severity Warning / Non-critical Cause and Action Cause: A disk is degraded and has received a SMART alert (predictive failure). The disk is likely to fail in the near future. Action: Replace the disk that has received the SMART alert. If the physical disk is a member of a nonredundant virtual disk, then back up the data before replacing the disk.
Action: Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot or too cold. See the enclosure documentation for more diagnostic information.
Cause and Action Cause: A user has caused a mirrored virtual disk to be split. When a virtual disk is mirrored, its data is copied to another virtual disk in order to maintain redundancy. After being split, both virtual disks retain a copy of the data although the mirror is no longer intact. The updates to the data are no longer copied to the mirror. This alert is for informational purposes.
Event ID — 2120 Description Enclosure firmware mismatch. Severity Warning / Non-critical Cause and Action Cause: The firmware on the EMM is not the same version. It is required that both modules have the same version of the firmware. This alert may be caused when a user attempts to insert an EMM module that has a different firmware version than an existing module. Action: Download the same version of the firmware to both EMM modules.
See the enclosure documentation for information on replacing enclosure components and for other diagnostic information. Related Alert Information Clear Alert Number: 2124 Related Alert Number: 2048 Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 1305 Event ID — 2123 Description Redundancy lost. Severity Warning / Non-critical Cause and Action Cause: A virtual disk or an enclosure has lost data redundancy.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1304 Event ID — 2125 Description Controller cache preserved for missing or offline virtual disk. Severity Warning / Non-critical Cause and Action Cause: Virtual disk controller was disconnected, during I/O operation. Action: Import foreign disks, if any. Check if the enclosure containing the virtual disk is disconnected from the controller.
Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has started. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2130 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2128 Description BGI cancelled. Severity OK / Normal / Informational Cause and Action Cause: BGI of a virtual disk has been cancelled. A user or the firmware may have stopped BGI.
Action: None Related Alert Information Clear Alert Number: Alert 2130 is a clear alert for alert 2127. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2131 Description Firmware version mismatch. Severity Warning / Non-critical Cause and Action Cause: The firmware on the controller is not a supported version. Action: Install a supported version of the firmware.
Cause and Action Cause: Storage Management has been installed on a system that has an Array Manager installation. Action: Installing Storage Management and Array Manager on the same system is not a supported configuration. Uninstall either Storage Management or Array Manager. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2050 SNMP Trap Numbers 103 Event ID — 2136 Description Virtual disk initialization.
SNMP Trap Numbers 853 Event ID — 2138 Description Enclosure alarm enabled. Severity OK / Normal / Informational Cause and Action Cause: A user has enabled the enclosure alarm. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2139 Description Enclosure alarm disabled.
Event ID — 2141 Description Physical disk dead segments removed. Severity OK / Normal / Informational Cause and Action Cause: Portions of the physical disk were formerly inaccessible. The disk space from these dead segments has been recovered and is now usable. Any data residing on these dead segments has been lost. This alert is for informational purposes. Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working.
SNMP Trap Numbers 751 Event ID — 2144 Description Controller alarm disabled. Severity OK / Normal / Informational Cause and Action Cause: A user has disabled the controller alarm. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2145 Description Controller battery low.
Event ID — 2147 Description Bad block sense error. Severity Warning / Non-critical Cause and Action Cause: A portion of a physical disk is damaged. Action: See the Server Administrator Storage Management online help for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2148 Description Bad block medium error.
Event ID — 2150 Description Bad block extended medium error. Severity Warning / Non-critical Cause and Action Cause: A portion of a physical disk is damaged. Action: See the Server Administrator Storage Management online help for more information.
Event ID — 2153 Description Enclosure service tag changed. Severity OK / Normal / Informational Cause and Action Cause: An enclosure service tag was changed. In most circumstances, this service tag should only be changed by your service provider. Action: Ensure that the tag was changed under authorized circumstances.
Event ID — 2156 Description Controller alarm has been tested. Severity OK / Normal / Informational Cause and Action Cause: The controller alarm test has run successfully. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2157 Description Controller configuration has been reset.
Event ID — 2159 Description Virtual disk renamed. Severity OK / Normal / Informational Cause and Action Cause: A user has renamed a virtual disk. When renaming a virtual disk on a PERC 4/SC, 4/DC, 4e/DC, 4/Di, CERC ATA100/4ch, PERC 5/E, PERC 5/i or SAS 5/iR controller, this alert displays the new virtual disk name. On the PERC 4/SC, 4/DC, 4e/DC, 4/Di, 4/IM, 4e/Si, 4e/Di, and CERC ATA 100/4ch controllers, this alert displays the original virtual disk name. This alert is for informational purposes.
Action: Although this alert is provided for informational purposes, you may need to assign a new hot spare to the virtual disk. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2162 Description Communication regained. Severity OK / Normal / Informational Cause and Action Cause: Communication with an enclosure has been restored. This alert is for informational purposes.
Cause and Action Cause: Storage Management is unable to determine whether the system has the minimum required versions of the RAID controller drivers. This alert is for informational purposes. Action: See the Readme file for driver and firmware requirements. In particular, if Storage Management experiences performance problems, you should verify that you have the minimum supported versions of the drivers and firmware installed.
SNMP Trap Numbers 753 Event ID — 2167 Description The current kernel version and the non-RAID SCSI driver version are older than the minimum required levels. See readme.txt for a list of validated kernel and driver versions. Severity Warning / Non-critical Cause and Action Cause: The version of the kernel and the driver do not meet the minimum requirements.
Related Alert Information Clear Alert Number: None Related Alert Number: 2118 Local Response Agent (LRA) Number: 2101 SNMP Trap Numbers 1154 Event ID — 2170 Description The controller battery charge level is normal. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Related Alert Information Clear Alert Number: Alert 2172 is a clear alert for alert 2171. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2173 Description Unsupported configuration detected. The SCSI rates of the enclosure management modules (EMMs) are not the same. EMM 0 % 1 EMM 1 % 2 Severity Warning / Non-critical Cause and Action Cause: An unsupported configuration was detected. Action: Replace one of the EMMs with the matching SCSI rate EMM.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2176 Description The controller battery Learn cycle has started. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
maintain cached data for 24 hours. If the battery is unable to maintain cached data for the required period of time, then the Learn cycle timeout occurs. Action: Replace the battery pack as the battery is unable to maintain a full charge. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2179 Description The controller battery Learn cycle has been postponed.
Cause and Action Cause: The % 1 indicates a substitution variable. The text for this substitution variable is displayed with the alert in the alert log and can vary depending on the situation. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2182 Description An invalid SAS configuration has been detected.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2060 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2185 Description Physical disk Replace Member Operation stopped for spare. Severity Warning / Non-critical Cause and Action Cause: This alert is provided for informational purposes.
Action: Contact technical support to replace the controller memory. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2060 SNMP Trap Numbers 753 Event ID — 2188 Description The controller write policy has been changed to Write Through. Severity Warning Cause and Action Cause: The controller battery is unable to maintain cached data for the required period of time.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2191 Description Multiple enclosures are attached to the controller. This is an unsupported configuration. Severity Critical / Failure / Error Cause and Action Cause: There are too many enclosures attached to the controller port. When the enclosure limit is exceeded, the controller loses contact with all enclosures attached to the port.
Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2194 Description The virtual disk Read policy has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2197 Description Physical disk Replace Member Operation stopped for rebuild. Severity Warning Cause and Action Cause: This alert is provided for informational purposes.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2200 Description Replace Member Operation not possible as SAS/SATA is not supported in the same virtual disk. Severity Warning/ Non-critical Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2201 Description A global hot spare failed.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2203 Description A dedicated hot spare failed. Severity Warning/ Non-critical Cause and Action Cause: The controller is unable to communicate with a disk that is assigned as a dedicated hot spare. The disk may have failed or been removed. There may also be a bad or loose cable. Action: Check if the disk is healthy and that it has not been removed. Check the cables.
Related Alert Information Clear Alert Number: None Related Alert Number: 2098, 2161, 2196 Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2206 Description The only hot spare available is a SATA disk. SATA disks cannot replace SAS disks. Severity Warning / Non-critical Cause and Action Cause: The only physical disk available to be assigned as a hot spare is using SATA technology. The physical disks in the virtual disk are using SAS technology.
Action: Initiate the battery learn cycle. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1153 Event ID — 2211 Description The physical disk is not supported. Severity Warning / Non-critical Cause and Action Cause: The physical disk may not have a supported version of the firmware or the disk may not be supported by your service provider.
Action: Replace the battery pack. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2100 SNMP Trap Numbers 1153 Event ID — 2214 Description Battery charge in progress. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2217 Description The battery learn mode has changed to warn. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2220 Description Replace Member Operation, Auto Replace Member Operation on Predictive Failure and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2223 Description Abort Check Consistency on Error, Replace Member Operation and Loadbalance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
SNMP Trap Numbers 751 Event ID — 2226 Description Load balance changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
Event ID — 2229 Description Abort Check Consistency on Error and Auto Replace Member Operation on Predictive Failure changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: Change at least one controller property and run the command again.
Event ID — 2232 Description The controller alarm is silenced. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2233 Description The Background initialization (BGI) rate has changed.
Event ID — 2235 Description The Check Consistency rate has changed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2236 Description Replace Member Operation modified. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2238 Description The controller debug log file has been exported. Severity OK / Normal / Informational Cause and Action Cause: The user has attempted to export the controller debug log. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2239 Description A foreign configuration has been cleared.
Event ID — 2241 Description The Patrol Read mode has changed. Severity OK / Normal / Informational Cause and Action Cause: The controller has changed the patrol read mode. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2242 Description The Patrol Read operation has started.
Event ID — 2244 Description A virtual disk blink has been initiated. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2245 Description A virtual disk blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2247 Description The controller battery is charging. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: 2358 Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2248 Description The controller battery is executing a Learn cycle.
Event ID — 2250 Description Redundant Path is broken. Severity Warning /Non-critical Cause and Action Cause: The redundant path is broken. Action: Check the connection to the enclosure, which is degraded. Related Alert Information Clear Alert Number: 2370 Related Alert Number: 2370 Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2251 Description The physical disk blink has initiated.
Event ID — 2253 Description Redundant path restored. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2254 Description The Clear operation has cancelled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2257 Description Controller preserved cache is discarded. Severity Warning /Non-critical Cause and Action Cause: The controller cache is discarded by the user. This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2258 Description Controller has preserved cache.
Event ID — 2260 Description An enclosure blink has ceased. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2261 Description A global rescan has initiated. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Event ID — 2263 Description SMART thermal shutdown is disabled. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2264 Description A device is missing. Severity Warning / Non-critical Cause and Action Cause: The controller cannot communicate with a device.
SNMP Trap Numbers 753, 803, 853, 903, 953, 1003, 1053, 1103, 1153, 1203 Event ID — 2266 Description Controller log file entry: %1 Severity OK / Normal / Informational Cause and Action Cause: The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text can vary depending on the situation. This alert is for informational purposes.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2051 SNMP Trap Numbers 104 Event ID — 2269 Description The physical disk Clear operation has completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2272 Description Patrol Read found an uncorrectable media error. Severity Critical / Failure / Error Cause and Action Cause: The Patrol Read task has encountered an error that cannot be corrected. There may be a bad disk block that cannot be remapped. Action: Back up your data.
Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2276 Description The dedicated hot spare is too small. Severity Warning / Non-critical Cause and Action Cause: The dedicated hot spare is not large enough to protect all virtual disks that reside on the disk group.
Cause and Action Cause: The battery is discharging. A battery discharge is a normal activity during the battery Learn cycle. The battery Learn cycle recharges the battery. You should receive alert 2179 when the recharge occurs. Action 1: Check if the battery Learn cycle is in progress. The battery also displays the Learn state while the Learn cycle is in progress. Action 2: If a Learn cycle is not in progress, replace the battery pack.
Event ID — 2281 Description Virtual disk has inconsistent data. Severity OK / Normal / Informational Cause and Action Cause: The virtual disk has inconsistent data. This may be caused when a power loss or system shutdown occurs while data is being written to the virtual disk. This alert is for informational purposes.
Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2284 Description A redundant path has been restored. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Action: None Related Alert Information Clear Alert Number: Alert 2284 is a clear alert for alert 2283.
SNMP Trap Numbers 1151 Event ID — 2287 Description Protection policy has been changed. Severity OK / Normal / Informational Cause and Action Cause: A new protection policy has been created / existing protection policy has been modified. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2384 Local Response Agent (LRA) Number: None SNMP Trap Numbers 101 Event ID — 2288 Description The patrol read has resumed.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2290 Description Single-bit ECC error on controller DIMM. Severity Warning / Non-critical Cause and Action Cause: An error involving a single bit has been encountered during a read or write operation. The error correction algorithm has corrected this error.
Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2293 Description The EMM has failed. Severity Critical / Failure / Error Cause and Action Cause: The failure may be caused by a loss of power to the EMM. The EMM self test may also have identified a failure. There could also be a firmware problem or a multi-bit error. Action: Replace the EMM. See the hardware documentation for information on replacing the EMM.
Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2296 Description An EMM has been inserted. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751, 851, 951 Event ID — 2297 Description An EMM has been removed.
Related Alert Number: None Local Response Agent (LRA) Number: 2090 SNMP Trap Numbers 853 Event ID — 2299 Description Bad PHY %1 Severity Critical / Failure / Error Cause and Action Cause: There is a problem with a physical connection or PHY. The %1 indicates a substitution variable. The text for this substitution variable is displayed with the alert in the alert log and can vary depending on the situation. Action: Contact your technical support.
Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See the hardware documentation for more information. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2091 SNMP Trap Numbers 854 Event ID — 2302 Description The enclosure is not responding. Severity Critical / Failure / Error Cause and Action Cause: The enclosure or an enclosure component is in a Failed or Degraded state.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2211 Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2305 Description The physical disk is too small to be used for a rebuild. Severity Warning / Non-critical Cause and Action Cause: The physical disk is too small to rebuild the data. Action: Remove the physical disk and insert a new physical disk that is the same size or larger than the disk that is being rebuilt.
Severity Critical / Failure / Error Cause and Action Cause: The bad block table is used for remapping bad disk blocks. This table fills, as bad disk blocks are remapped. When the table is full, bad disk blocks can no longer be remapped and disk errors can no longer be corrected. At this point, data loss can occur. The %1 indicates a substitution variable. The text for this substitution variable is displayed with the alert in the alert log and can vary depending on the situation.
Event ID — 2311 Description The firmware on the EMMs is not the same version. EMM0 %1 EMM1 %2. Severity Warning / Non-critical Cause and Action Cause: The firmware on the EMM modules is not the same version. It is required that both modules have the same version of the firmware. This alert may be caused if you attempt to insert an EMM module that has a different firmware version than an existing module. The %1 and %2 indicate a substitution variable.
SNMP Trap Numbers 1003 Event ID — 2314 Description The initialization sequence of SAS components failed during system startup. SAS management and monitoring is not possible. Severity Critical / Failure / Error Cause and Action Cause: Storage Management is unable to monitor or manage SAS devices. Action: Reboot the system. If problem persists, make sure you have supported versions of the drivers and firmware.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2318 Description Problems with the battery or the battery charger have been detected. The battery health is poor. Severity Warning / Non-critical Cause and Action Cause: The battery or the battery charger is not functioning properly. Action: Replace the battery pack.
Action: Replace the DIMM immediately to avoid data loss or data corruption. The DIMM is a part of the controller battery pack. See your hardware documentation for information on replacing the DIMM or contact technical support. Related Alert Information Clear Alert Number: None Related Alert Number: 2321 Local Response Agent (LRA) Number: 2061 SNMP Trap Numbers 754 Event ID — 2321 Description Single-bit ECC error. The DIMM is critically nonfunctional. There is no further reporting.
Event ID — 2323 Description The power supply is switched on. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Status: Alert 2323 is a clear alert for alerts 2313 and 2322. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1001 Event ID — 2324 Description The AC power supply cable has been removed.
Event ID — 2326 Description A foreign configuration has been detected. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. The controller has physical disks that were moved from another controller. These physical disks contain virtual disks that were created on the other controller. See the Import Foreign Configuration and Clear Foreign Configuration section in the Server Administrator Storage Management User’s Guide for more information.
SNMP Trap Numbers 753 Event ID — 2329 Description SAS port report: %1 Severity Warning / Non-critical Cause and Action Cause: The text for this alert is generated by the controller and can vary depending on the situation. The %1 indicates a substitution variable. The text for this substitution variable is generated by the controller and is displayed with the alert in the alert log. This text can vary depending on the situation. Action: Run the PHY integrity test diagnostic.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2332 Description A controller hot plug has been detected. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
that were generated while Storage Management was not running. This text can vary depending on the situation. Action: If there is a problem, review the controller event log and the Server Administrator alert log for significant events or alerts that may assist in diagnosing the problem. Check the health of the storage components. See the hardware documentation for more information.
Event ID — 2338 Description The controller has recovered cached data from the BBU. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1151 Event ID — 2339 Description The factory default settings have been restored.
SNMP Trap Numbers 1204 Event ID — 2341 Description The Check Consistency made corrections and completed. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2342 Description The Check Consistency found inconsistent parity data. Data redundancy may be lost.
SNMP Trap Numbers 1203 Event ID — 2344 Description The virtual disk initialization terminated. Severity Warning / Non-critical Cause and Action Cause: A user has cancelled the virtual disk initialization. Action: Restart the initialization. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: 2080 SNMP Trap Numbers 1203 Event ID — 2345 Description The virtual disk initialization failed.
Related Alert Information Clear Alert Number: None Related Alert Number: 2048, 2050, 2056, 2057, 2076, 2079, 2081, 2083, 2095, 2129, 2201, 2203, 2270, 2282, 2369 Local Response Agent (LRA) Number: 2070 SNMP Trap Numbers 903 Event ID — 2347 Description The rebuild failed due to errors on the source physical disk. Severity Critical / Failure / Error Cause and Action Hardware RAID: Cause and Action Cause: You are attempting to rebuild data that resides on a defective disk.
Event ID — 2349 Description A bad disk block could not be reassigned during a write operation. Severity Critical / Failure / Error Cause and Action Cause: A write operation could not complete because the disk contains bad disk blocks that could not be reassigned. Data loss may have occurred and data redundancy may also be lost. Action: Replace the disk.
Event ID — 2352 Description A physical disk that was marked as missing has been replaced. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Status: Alert 2352 is a clear alert for alert 2351. Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2353 Description The enclosure temperature has returned to normal.
Event ID — 2355 Description Enclosure firmware download failed. Severity Warning / Non-critical Cause and Action Cause: The system was unable to download firmware to the enclosure. The controller may have lost communication with the enclosure. There may have been problems with the data transfer or the download media may be corrupt. Action: Attempt to download the enclosure firmware again. If problems continue, verify that the controller can communicate with the enclosure.
Action: There may be a problem with the enclosure. Check the health of the enclosure and its components by selecting the enclosure object in the tree view. The Health subtab displays a red X or yellow exclamation point for enclosure components that are Failed or Degraded. See the enclosure documentation for more information.
Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2361 Description Physical disk(s) that are part of a virtual disk have been removed while the system was shut down. This removal was discovered during system start-up. Severity Warning Cause and Action Cause: This alert is for informational purposes. Action: None.
Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 753 Event ID — 2366 Description Dedicated spare imported as global due to missing arrays. Severity OK / Normal / Informational Cause and Action Cause: This alert is for informational purposes.
Cause and Action Cause: This alert is for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: 2049, 2052, 2162, 2292 Local Response Agent (LRA) Number: None SNMP Trap Numbers 851 Event ID — 2369 Description Virtual Disk Redundancy has been degraded. Severity OK / Normal / Informational Cause and Action Cause: A physical disk in a RAID 6 virtual disk has either failed or been removed. Action: Replace the missing or failed physical disk.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2372 Description Attempted import of Virtual Disk exceeding the limit supported on the controller. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Action: None.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2375 Description Attempted import of Virtual Disk with missing physical disk. Severity OK / Normal / Informational Cause and Action Cause: User is attempting to import a foreign virtual disk with a missing physical disk. This alert is provided for informational purposes. Action: None.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2378 Description Attempted import of an incompatible physical drive. Severity OK / Normal / Informational Cause and Action Cause: User is attempting to import an incompatible physical drive. This alert is provided for informational purposes. Action: None.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 751 Event ID — 2381 Description Controller preserved cache is recovered. Severity OK / Normal / Informational Cause and Action Cause: This alert is provided for informational purposes. Action: None.
Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2384 Description The Warning level set for the hot spare protection policy is violated for the Virtual Disk. Severity Warning / Non-critical Cause and Action Cause: The number of physical disks you specified for the hot spare protection policy is violated. Action: Reassign the number of hot spares as specified in the protection policy for that RAID level.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2387 Description A virtual disk bad block medium error is detected. Severity Critical / Failure / Error Cause and Action Cause: Virtual disk bad blocks are due to presence of unrecoverable bad blocks on one or more member physical disks. Action: 1. Related Alert Information Perform a backup of the virtual disk with the Verify option selected. One of the following can occur: • Backup operation fails.
Severity OK / Normal / Informational Cause and Action Cause: Virtual disk bad blocks are cleared. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2390 Description The Cryptographic Erase operation is performed on the physical disk. Severity OK / Normal / Informational Cause and Action Cause: Instant Encrypt Erase operation is successful on Self Encryption Disks (SEDs.
Cause and Action Cause: The Encrypted virtual disk operation on normal virtual disk (created using Self encrypting disks only) is successful. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2394 Description Persistent Hot Spare is enabled. Severity OK / Normal / Informational Cause and Action Cause: The Persistent Hot Spare option is enabled. Action: None.
Action: Replace the failed physical disk. You can identify the failed disk by locating the disk that has a red “X” for its status. Rebuild the physical disk. When finished, restart the check consistency operation. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1204 Event ID — 2397 Description The Check Consistency completed with uncorrectable errors.
Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2400 Description Physical disk configuration data updated as it was stale. Severity Informational Cause and Action Cause: The physical disk configuration data is updated because it was outdated. Action: None.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 904 Event ID — 2403 Description Virtual Disk is available. Severity OK / Normal / Informational Cause and Action Cause: The operating system detects the newly created virtual disk. Action: None. NOTE: This alert also appears when a CacheCade is created but is not available for the operating system (as it is a CacheCade and not a Virtual Disk).
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2407 Description Controller Encryption mode is enabled in LKM. Severity Informational Cause and Action Cause: The Local Key Management (LKM) encryption mode is enabled. Action: None.
Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2413 Description Controller CacheCade is created. Severity Informational Cause and Action Cause: This alert is provided for informational purposes. Action: None Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2414 Description Controller CacheCade is deleted.
SNMP Trap Numbers 1151 Event ID — 2416 Description Disk medium error detected. Severity Warning / Non-critical Cause and Action Cause: A part of the physical disk is damaged. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 903 Event ID — 2417 Description There is an unrecoverable medium error detected on virtual disk.
Event ID — 2418 Description Disk medium error on virtual disk has been corrected Severity Informational Cause and Action Cause: This alert is for informational purposes. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1201 Event ID — 2425 Description State change on Physical disk from READY to Non-RAID. Severity Informational Cause and Action Cause: User triggered action.
Event ID — 2429 Description Drive Prepared for Removal. Severity Informational Cause and Action Cause: User triggered action. Action: Execute "Prepare to Remove" task from UI in a PCIeSSD setup Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2430 Description Physical Device Log Exported. Severity Informational Cause and Action Cause: User triggered action.
Event ID — 2432 Description The PCIeSSD device was found to be in security locked state. Full initialization has to be done on the security locked drive to recover the drive in usable state. Severity Warning Cause and Action Cause: Last full initialization was stopped for some reason and hence the device is in security locked state. Action: Run full initialization to recover the device.
Event ID — 2435 Description Physical Device is approaching read-only mode. Severity Informational Cause and Action Cause: User triggered task. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2436 Description Physical Device is in read-only mode. Severity Critical Cause and Action Cause: User triggered task. Action: None.
Event ID — 2438 Description The physical device blink has ceased. Severity Informational Cause and Action Cause: User triggered task. Action: None. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2440 Description The physical device available space is below threshold.
Event ID — 2442 Description The reliability of the PCIe solid state device identified in the message degraded. Data loss is possible. Severity Error Cause and Action Cause: None Action: Back up the data on the device, and contact your service provider for further instructions.
Event ID — 2445 Description Cryptographic Erase operation is successfully completed on the physical disk drive identified in the message. Severity Informational Cause and Action Cause: User Triggered Task Action: No response action is required.
Event ID — 2448 Description The Remaining Rated Write Endurance (RRWE) Threshold for SAS and SATA SSD is set to . Severity Informational Cause and Action Cause: The Remaining Rated Write Endurance (RRWE) Threshold for SAS and SATA solid-state drives has been modified. Action: No response action is required.
Event ID — 2451 Description The disk write cache policy is changed. Severity Informational Cause and Action Cause: The disk write cache policy of physical disk drive is changed.. Action: No response action is required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2454 Description Unable to complete the Cryptographic erase operation on the physical disk drive .
Event ID — 2700 Description The following journal mirror is available. %1 Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1601 Event ID — 2701 Description The following journal mirror is being replaced.(wwn ) %1 : FluidCache. Severity Information Cause and Action No action required.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2704 Description The cluster ID in the journal does not match the cluster ID in the configuration file. : FluidCache. Severity Error Cause and Action Service is required. Contact Technical Support.
Event ID — 2875 Description The following Disk is beginning flushing.(wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2876 Description The following Disk has finished flushing. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1204, 1504 Event ID — 2902 Description The following storage device has had transient failures. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
Event ID — 2905 Description The following cache device is being removed. (wwn ) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2906 Description Caching is being removed for the following storage device. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2909 Description The following journal mirror is available. %1The following storage device is in an unknown state.(wwn) %1 (path) %2 : FluidCache. Severity Warning Cause and Action Service is required. Contact Technical Support.
Event ID — 2912 Description Resilvering for the following cache device is complete .(wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 901 Event ID — 2913 Description The following failed cache device has completed recovery. (wwn) %1 (path) %2 : FluidCache. Severity Information Cause and Action No action required.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2916 Description Running on an evaluation license. Days remaining %1 (days): FluidCache. Severity Information Cause and Action A permanent license should be purchased.
Event ID — 2919 Description Running on an expired/invalid license. Configuration changes are disabled.: FluidCache. Severity Error Cause and Action A valid permanent license must be installed. Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2920 Description A license has been installed.: FluidCache. Severity Information Cause and Action No action required.
Related Alert Information Clear Alert Number: None Related Alert Number: None Local Response Agent (LRA) Number: None SNMP Trap Numbers 1604 Event ID — 2923 Description One or more cache devices are missing. Cache is hung.: FluidCache. Severity Error Cause and Action To resolve the issue, insert the missing cache device. If the cache device was unplugged, reactivate it.
SNMP Trap Numbers 1203, 1503, 1603 Event ID — 2931 Description Even though caching was enabled in write-back or write-through mode, it is currently operating in passthrough mode.: FluidCache. Severity Warning Cause and Action To resolve the issue, add one or more PCIe SSDs to the cache pool.
4 System Event Log Messages for IPMI Systems The tables in this chapter list the system event log (SEL) messages, their severity, and cause. NOTE: For corrective actions, see the appropriate documentation. Temperature Sensor Events The temperature sensor event messages help protect critical components by alerting the systems management console when the temperature rises inside the chassis.
Event Message Severity Cause The temperature is outside of range. Critical Temperature of the backplane, system board, system inlet, or the carrier in the specified system is outside of normal operating range. The temperature is within range. Information Temperature of the backplane, system board, system inlet, or the carrier in the specified system returned to a normal operating range.
Event Message Severity Cause The voltage is outside of range. Critical Voltage of the monitored Entity is outside of normal operating range. The voltage is within range. Information Voltage of the monitored Entity returned to a normal operating range. Fan Sensor Events The cooling device sensors monitor how well a fan is functioning.
Event Message Severity Cause Fan RPM is greater than the upper warning threshold. Warning The speed of the specified fan exceeded the warning threshold. Fan RPM is greater than the upper critical threshold. Critical The speed of the specified fan exceeded the critical threshold. Fan RPM is outside of range. Critical The speed of the specified fan might not provide enough cooling to the system. Fan RPM is within range.
Event Message Severity Cause status processor sensor recovered from IERR. Information This event is generated when a processor recovers from the internal error. status processor sensor disabled. Warning This event is generated for all processors that are disabled. status processor sensor terminator not present. Information This event is generated if the terminator is missing on an empty processor slot.
Event Message Severity Cause CPU is absent. Critical This event is generated when the system could not detect the processor. CPU is operating correctly. Information This event is generated when the processor recovered from an error. CPU is configured correctly. Information The specified CPU is configured correctly. Power Supply Events The power supply sensors monitor the functionality of the power supplies.
Event Message Severity Cause PS 1 Status: Power supply sensor for PS 1, presence was deasserted. Critical This event is generated when the power supply is removed. PS 1 Status: Power supply sensor for PS 1, failure was asserted. Critical This event is generated when the power supply has failed. PS 1 Status: Power supply sensor for PS 1, failure was deasserted. Information This event is generated when the power supply has recovered from an earlier failure event.
Event Message Severity Cause Power supply is correctly configured. Information This event is generated when the power supply has recovered from an earlier invalid configuration. Power supply is operating normally. Information This event is generated when the power supply has recovered from an earlier failure event. Cannot communicate with power supply . Critical The power supply may operate, however power supply monitoring is degraded.
Memory ECC Events The memory ECC event messages monitor the memory modules in a system. These messages monitor the ECC memory correction rate and the type of memory events that occurred. Table 10. Memory ECC Events Event Message Severity Cause ECC error correction detected on Bank # DIMM [A/B]. Information This event is generated when there is a memory error correction on a particular Dual Inline Memory Module (DIMM). ECC uncorrectable error detected on Bank # [DIMM].
Event Message Severity Cause crashed (timer expired because no response was received from Host) and the action is set to power off. BMC OS Watchdog performed system power cycle. Critical This event is generated when the BMC watchdog detects that the system has crashed (timer expired because no response was received from Host) and the action is set to power cycle. The OS watchdog timer reset the system.
Event Message Severity Cause Memory Mirrored redundancy lost. Critical This event is generated when redundancy is lost in a mirrored memory configuration. Memory Mirrored redundancy regained. Information This event is generated when the redundancy lost or degraded earlier is regained in a mirrored memory configuration. Memory Spared redundancy degraded. Warning This event is generated when there is a memory failure in a spared memory configuration. Memory Spared redundancy lost.
Event Message Severity Cause Memory spare redundancy is degraded. Check memory device at location . Warning This event is generated when there is a memory failure in a spare-configured memory configuration. Hardware Log Sensor Events The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full.
Event Message Severity Cause Drive in critical array was asserted. Critical This event is generated when the drive is placed in critical array. Drive in critical array was deasserted. Information This event is generated when the drive is removed from critical array. Drive in failed array was asserted. Critical This event is generated when the drive is placed in the fail array. Drive in failed array was deasserted.
Event Message Severity Cause The chassis is closed while the power is on. Information This event is generated when the earlier intrusion has been corrected while the power is on. The chassis is open while the power is off. Critical This event is generated when the intrusion sensor detects an intrusion while the system is off. The chassis is closed while the power is off. Information This event is generated when the earlier intrusion has been corrected while the power is off.
Event Message Severity Cause Err Reg Pointer OEM Diagnostic data event was asserted. Information This event is generated when an OEM event occurs. OEM events can be used by the service team to better understand the cause of the failure. System Board PFault Fail Safe state asserted. Critical This event is generated when the system board voltages are not at normal levels.
Event Message Severity Cause SBE Log Disabled correctable memory error logging disabled was asserted. Critical This event is generated when the ECC single bit error rate is exceeded. CPU Protocol Err transition to non-recoverable. Critical This event is generated when the processor protocol enters a nonrecoverable state. CPU Bus PERR transition to non-recoverable. Critical This event is generated when the processor bus PERR enters a nonrecoverable state.
Event Message Severity Cause A PCI system error was detected on a component at bus device function . Critical This is generated when the system has crashed and recovered. A PCI system error was detected on a component at slot . Critical This is generated when the system has crashed and recovered. A bus correctable error was detected on a component at bus device function .
Event Message Severity Cause Memory device was added at location . Information This event is generated when memory is added to the system. Memory device is removed from location . Information This event is generated when memory is removed from the system. Unsupported memory configuration; check memory device at location . Critical This event is generated when memory configuration is incorrect for the system. Correctable memory error rate exceeded for .
Event Message Severity Cause A hardware incompatibility was corrected between BMC/ iDRAC firmware and CPU. Information This event is generated when an earlier mismatch between the BMC and iDRAC firmware and the processor is corrected. Device option ROM on embedded NIC failed to support Link Tuning or FlexAddress. Critical This event is generated when the PCI device option ROM for a NIC does not support link tuning or the Flex addressing feature.
Fatal Error Code Description Cause 86 Interrupt controller failure. This error code indicates interrupt controller failure. 87 Timer refresh failure. This error code indicates timer refresh failure. 88 Programmable interval timer error. This error code indicates a programmable interval timer error. 89 Parity error. This error code indicates a parity error. 8A SIO failure. This error code indicates SIO failure. 8B Keyboard controller failure.
Description Severity Cause A runtime critical stop occurred. Critical The operating system encountered a critical error and was stopped abnormally. An OS graceful stop occurred. Information The operating system was stopped. An OS graceful shut-down occurred. Information The operating system was shut down normally. Cable Interconnect Events The cable interconnect messages in the table are used for detecting errors in the hardware cabling. Table 19.
Description Severity Cause The battery is operating normally. Information This event is generated when an earlier battery condition was corrected. The battery has failed. Critical This event is generated when the sensor detects a failed or missing battery. Power And Performance Events The power and performance events are used to detect degradation in system performance with change in power supply. Table 21.
Description Severity Cause System Board Power Optimized: Performance status sensor for System Board, Halted, system power exceeds capacity was deasserted Normal This event is generated when system performance was restored. The system performance degraded. Warning This event is generated when a change degrades system performance. The system performance degraded because of thermal protection. Warning This event is generated when a change in thermal protection degrades system performance.
Description Severity Cause The is absent. Critical This event is generated when the device was not detected. Miscellaneous Events The following table provides events related to hardware and software components like mezzanine cards, sensors, firmware etc. and compatibility issues. Table 23.
Description Severity Cause LinkT/FlexAddr: Link Tuning sensor, device option ROM failed to support link tuning or flex address (Mezz ) was asserted Critical This event is generated when ROM does not support Flex address or link tuning. LinkT/FlexAddr: Link Tuning sensor, failed to get link tuning or flex address data from BMC/iDRAC was asserted Critical This event is generated when link tuning or Flex address information is not obtained from BMC/iDRAC. The is removed.
Description Severity Cause Removable Flash Media is write protected. Warning This event is generated when the module is write-protected. Changes may not be written to the media. Internal Dual SD Module is redundant. Information This event is generated when both SD cards are functioning properly. Internal Dual SD Module redundancy is lost. Critical This event is generated when either one of the SD cards or both the SD cards are not functioning properly.
