Compatibility Matrix

Table 4. Change Management Products (continued)
Product Name DUP SUU DSU (Applicable on
RedHat / SUSE)
DRM
CMC All versions All versions NA NA
iDRAC9 with LC All versions All versions All versions NA
NOTE:
● Dell EMC recommends using the latest BIOS available at www.dell.com/Support/Home.
● Dell EMC recommends using Dell System Update instead of YUM Linux repository.
Compatibility Of Deployment Suite Of Products
The following table describes the compatibility of Deployment Suite of Products.
Table 5. Deployment Suite of Products
Product Name
Lifecycle Controller (LC) with
iDRAC9
Version 5.00.00.00
Server Administrator 10.1.0.0
iDRAC9 with LC NA
DUP 20.06.00
NOTE: Dell EMC recommends using integrated Dell Remote Access Controller 9 (iDRAC9) with Dell Lifecycle Controller
instead of Dell Systems Build and Update Utility (SBUU), as SBUU is not supported on yx4x generation servers. iDRAC with
Lifecycle Controller is an Embedded Systems Management application, available on yx2x generation and later servers, for
operating system deployment and life cycle management of PowerEdge servers. You can access Dell Lifecycle Controller by
pressing <F10> during system boot up.
Compatibility Of Dell Embedded Management
Products
The following table describes the compatibility for Dell Embedded Management products.
Table 6. Embedded Management Products
Product Name iDRAC9 with LC iSM
Version 5.00.00.00 3.6.0
Supported Dell EMC Systems yx3x generation PowerEdge systems
yx2x generation PowerEdge
systems
Server Administrator 10.1.0.0 10.1.0.0
Lifecycle Controller NA NA
iDRAC9 with LC NA 5.00.00.00
iSM 3.6.0 NA
NOTE:
● The iDRAC9 features vary based on the license purchased. For more information, see the iDRAC 9 User’s Guide.
● Using Dell Embedded Management, you can perform out-of-band hardware configuration, operating system deployment,
hardware updates, and so on.
8 OpenManage Software Compatibility Matrix