Dell EMC OpenManage Software Compatibility Matrix Version 10.1.0.0 July 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 OMSA Customer Survey....................................................................................................................................................4 Acronyms Used In This Document...................................................................................................................................4 Supported operating systems...
1 Overview This document provides information about the interoperability of the OpenManage software products. NOTE: ● Upgrade the OpenManage components to the latest version to effectively use the latest features. ● For information about compatibility of OpenManage Connections products, see the Dell EMC OpenManage Connections Compatibility Matrix at dell.com/OMConnectionsEnterpriseSystemsManagement. For more information, see the Dell EMC Systems Software Support Matrix at www.dell.com/openmanagemanuals.
Table 1. Acronyms (continued) Acronym Product Name MN Dell EMC Managed Nodes (Instrumentation and Remote Enablement) iSM Dell EMC iDRAC Service Module For yx2x generation PowerEdge systems and later.
Table 2. Naming Convention For PowerEdge Systems Type of Server Specifics R indicates Rack Overall Performance Generation Processor T indicates Tower 1—5: Low End Server 0—Intel Processor M indicates Modular 5—10: High End Server 4 indicates yx4x generation PowerEdge servers 5—AMD Processor F indicates Flexible C indicates Cloud For example: Dell PE R740 is Rack, yx4x generation PowerEgde server.
2 OpenManage Software Compatibility Matrix This section describes the compatibility among the OpenManage products. NOTE: Dell EMC recommends using the Embedded Management, Integrated Dell Remote Access Controller 9 (iDRAC9) with Lifecycle Controller instead of Dell Systems Build and Update Utility (SBUU). SBUU is replaced with Lifecycle Controller on yx4x generation of PowerEdge servers.
Table 4. Change Management Products (continued) Product Name DUP SUU DSU (Applicable on RedHat / SUSE) DRM CMC All versions All versions NA NA iDRAC9 with LC All versions All versions All versions NA NOTE: ● Dell EMC recommends using the latest BIOS available at www.dell.com/Support/Home. ● Dell EMC recommends using Dell System Update instead of YUM Linux repository. Compatibility Of Deployment Suite Of Products The following table describes the compatibility of Deployment Suite of Products.
● Dell EMC recommends using the latest BIOS available at www.dell.com/support. Compatibility of Dell Monitoring Products The following table describes the compatibility of Dell EMC monitoring products. Table 7. Monitoring products Product Name Server Administrator iDRAC9 with LC Version 10.1.0.0 5.00.00.00 Server Administrator 10.1.0.0 10.1.0.0 iDRAC9 with LC 5.00.00.
