Reference Guide
Table Of Contents
- Dell EMC OpenManage SNMP Reference Guide Version 10.1.0.0
- Contents
- Introduction
- What is new in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- System Battery Table
- Amperage Probe Table
- Power Unit Group
- Power Supply Table
- Power Usage Table
- Voltage Probe Table
- System Information Group
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Table 332. Fan Control Capabilities (continued)
lowOrhighSpeedCapab
le(6)
The fan can be set to low or high speed.
Table 333. Front-Panel LED Control Capabilities
Variable Name : DellLEDControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The LED control capabilities are unknown.
alertOnErrorCapable
(2)
The LED control can be set to alert on an error
condition.
alertOnWarningAndEr
rorCap able(4)
The LED control can be set to alert on an error and a
warning condition.
alertOnWarningOrErr
orCapa ble(6)
The LED control can be set to alert on an error or a
warning condition.
Table 334. Front-Panel LED Control Settings
Variable Name : DellLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The LED control setting is unknown.
alertOnError(2)
The LED control is set to alert on an error condition.
alertOnWarningAndE
rror(4)
The LED control is set to alert on an error or a warning
condition.
Table 335. Hard-Drive Fault LED Control Capabilities
Variable Name : DellHDFaultLEDControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The hard drive has no fault LED capabilities.
unknownCapabilitie
s(1)
The hard-drive fault LED capabilities are unknown.
enableCapable(2)
The hard-drive fault LED can be disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The hard-drive fault LED can indicate not ready.
resetCapable(8)
The hard-drive fault LED can be reset.
Table 336. Hard-Drive Fault LED Control Settings
Variable Name : DellHDFaultLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any fault settings capabilities.
unknown(1)
The hard-drive fault LEDs’ state is unknown.
82 Server Administrator Group