Reference Guide

Table Of Contents
Table 1876. Virtual Disk Write Policy (continued)
Possible values:
1: Enabled - Adaptec Write Cache Enabled Protected
2: Disabled - Adaptec Write Cache Disabled
3: LSI Write Back
4: LSI Write Through
5: Enabled Always (Adaptec only)
6: Enabled Always (SAS only)
9: Not Applicable
Syntax INTEGER
Access Read-only
Table 1877. Virtual Disk Read Policy
Name
virtualDiskReadPolicy
Object ID 1.3.6.1.4.1.674.10893.1.20.140.1.1.11
Description Indicates whether the controller's read cache are used when reading from a virtual disk.
Possible values:
1: Enabled - Adaptec Read Cache Enabled
2: Disabled - Adaptec Read Cache Disabled
3: LSI Read Ahead
4: LSI Adaptive Read Ahead
5: LSI No Read Ahead
9: Not Applicable
Syntax INTEGER
Access Read-only
Table 1878. Virtual Disk Cache Policy
Name
virtualDiskCachePolicy
Object ID 1.3.6.1.4.1.674.10893.1.20.140.1.1.12
Description Indicates whether the controller's cache is used when reading from or writing to a
virtual disk. Possible values: 1: Direct I/O (LSI) 2: Cached I/O (LSI) 99: Not Applicable
Syntax INTEGER
Access Read-only
Table 1879. Virtual Disk Layout
Name
virtualDiskLayout
Object ID 1.3.6.1.4.1.674.10893.1.20.140.1.1.13
Description Indicates the virtual disk's RAID type. Possible values: 1: Concatenated 2: RAID-0 3:
RAID-1 7: RAID-5 8: RAID-6 10: RAID-10 12: RAID-50 19: Concatenated RAID 1 24:
RAID-60 25: CacheCade
Syntax INTEGER
Access Read-only
414 Storage Management Group