Reference Guide

Table Of Contents
Table 1462. BMC Serial Connection Mode Settings (continued)
Data Type:Integer
These values are bit masks; therefore, combination values are possible.
Possible Data Values Meaning of Data Value
-- none(0)
No modes enabled.
modemBasic(1)
Modem Basic mode is enabled.
modemPPP(2)
Modem PPP mode is enabled.
modemTerminal(4)
Modem Terminal mode is enabled.
directBasic(8)
Direct Basic mode is enabled.
directPPP(16)
Direct PPP mode is enabled.
directTerminal(32)
Direct Terminal mode is enabled.
Table 1463. BMC Serial Flow Control Type
Variable Name:DellBMCSerialFlowControlType
Data Type:Integer
Possible Data Values Meaning of Data Value
-- none(0)
No flow control used.
rtscts(1)
RTS/CTS (hardware) flow control used.
xonXoff(2)
XON/XOFF flow control used.
Table 1464. BMC Serial Bit Rate Type
Variable Name:DellBMCSerialBitRateType
Data Type:Integer
Possible Data Values Meaning of Data Value
bps9600(6)
Bit rate is 9600 bps (bits per second)
bps19200(7)
Bit rate is 19200 bps
bps38400(8)
Bit rate is 38400 bps
bps57600(9)
Bit rate is 57600 bps
bps115200(10)
Bit rate is 115200 bps
Table 1465. BMC LAN IP Address Source Type
Variable Name:DellBMCLANIPAddressSourceType
Data Type:Integer
Possible Data Values Meaning of Data Value
-- unspecified(0)
Source is unspecified.
static(1)
IP address is static.
dhcp(2)
Dynamic Host Configuration Protocol
(DHCP) used to obtain IP address.
biosOrSystemSoftware(3)
BIOS or system software provided IP
Address.
other(4)
Other protocol used to obtain IP
address.
Server Administrator Group 327